- Typical applications include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors,and panels), aluminum, masonry and vinyl siding.
- Can adhere to damp or green concrete and has a skin time of 2 hrs with a tack-free time of 6 to 8 hr to significantly reduce dirt attraction.
- Movement capability of +100/-50% in typical field conditions, is low VOC, paintable, jet fuel-resistant, and will not crack, craze or yellow under extreme UV exposure.
- Suitable for water immersion and will not out gas.
- Smoke Stop for Partition Joints & Penetrations
- Unique capability to adhere to damp or green concrete and will not out gas.
- Compatible and can be coated over with Tremco's Vulkem Deck Coatings, ExoAir® Air Barrier products and the cold, fluid-applied TREMproof® line of below-grade waterproofing products.
-
Dymonic 100 is a durable, flexible polyurethane sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
-
The 18 x 14 Fiberglass Mesh Screening from Phifer are designed for applications where extra strength is desired. Built to withstand debris from harsh winds and storms, keep out most insects and other unwanted guests, but still allow for cooling breezes to flow through, these fiberglass screens make the perfect choice for any space that’s exposed to the more severe elements. Fiberglass Mesh is the traditional choice for patio and pool enclosures “See the view, not the screen.”
- Phiferglass, Phifer’s trademarked fiberglass screening, has been the standard in the industry for decades.
- Woven from permanent glass yarn, which has been coated with a protective vinyl. This ensures lasting beauty, color and flexibility.
- Will not rust, corrode or stain.
- These screen fabrics are produced under the most exacting conditions. They meet rigid specifications and have all passed 1200 hours of QUV accelerated weathering.
Standard Widths 24" 30" 32" 36" 42" 48" 60" 72" 84" 96" (Other widths available upon request) Standard Roll Length 164' some sizes available in 100' rolls Standard Colours Charcoal and Gray -
Phifer Black & Brite Aluminum Screen offers the best outward visibility available in an aluminum insect screening product. Produced with Phifer’s electrodeposition paint system, Black & Brite Aluminum screen has a premium coating that is durable and has excellent weathering characteristics.
Standard Widths 18" 20" 22" 24″ 26" 28" 30″ 32″ 34" 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black and Brite
-
Phifer Pet Insect Screen, pet-resistant insect screening is tear and puncture-resistant to prevent damage by dogs and cats.
- Ideal for use in high-traffic areas.
- PetScreen installs like regular insect screening.
- PetScreen is excellent for use in patio and porch enclosures as well as windows and doors.
- Pet Screen provides excellent outward visibility and is not harmful to pets.
- GREENGUARD certified
- Contains Microban® antimicrobial protection which inhibits the growth of stain and odour causing bacteria, mold and mildew on the screen.
Stocked Widths 36" 48" Standard Roll Length 100' Standard Colors Black and Grey
Composition Vinyl-coated polyester
Mesh Weight 11.2 oz/yd2 (380 g/m2)
Fabric Thickness .036 (.914mm)
Openness Factor Approximately 36%
UV Blockage Approximately 64%
-
Phifer Better Vue Insect Screening is an improved Visibility screen (iVis) that offers clearer views with enhanced insect screen performance.
- New Water Shed Technology™ coating repels water, prevents dirt and debris from staying on the screen and remains cleaner longer.
- Increased insect protection and better airflow.
- More optical clarity vs. standard insect screening for a sharp, more brilliant outward view.
- Improves light transmittance in low-E glass windows with 10% better insect protection.
- Passed accelerated weathering tests (QUV 1200hrs. and Xenon Arc 2500 Kjs.)
- GREENGUARD certified.
Standard Widths 24″ 30″ 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black
-
Phifer Ultra Vue Insect Screening is an excellent Visibility screen (eVis) that offers a premium viewing experience.
- New Water Shed Technology™ coating repels water, prevents dirt and debris from staying on the screen and remains cleaner longer.
- Ideal for windows or low traffic applications where the focus is on the view.
- 25% more optical clarity for a crisper, brighter outward view.
- Improves light transmittance in low-E glass windows.
- GREENGUARD certified.
Standard Widths 24″ 30″ 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black
-
Used for holding screening securely in windows and doors.
- Foam spline aids in securing windows and doors screen fabric
- Foam spline is durable even when exposed to the elements
-
Available Sizes (4,000 ft Stock Length Rolls) .130 .155
-
Available Sizes (4,000 ft Stock Length Rolls) .170 .180 .200 .215 .230
-
Available Sizes (37 ft Roll) in Grey Colour 1/4″ x 3/8″
-
Dymonic® FC is a low-modulus, single-component, moisture cure, polyurethane hybrid sealant, formulated with proprietary saline end-capped polymer technology. Dymonic FC is a high-performance hybrid that combines the best performance characteristics of polyurethane and silicone sealant.
- Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
- Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, Aluminum, masonry and vinyl siding.
- Smoke Stop for Partition Joints & Penetrations
- It is fast curing with a skin time of 60 min and a tack-free time of 3 to 4 hrs to significantly reduce dirt attraction.
- Dymonic FC will not green crack due to early movement and has an exceptional movement capability of ± 35%.
- Dymonic FC is also low-VOC, paintable and will not crack or craze under UV exposure.
-
Vulkem® 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints.
- Approved for exterior use only.
- Excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints.
- Durable, flexible, and offers excellent performance in dynamic joints.
-
Vulkem® 45 SSL Semi Self Level is a one-part, moisture-curing, low-modulus polyurethane sealant especially developed for sealing joints in level and/or slightly sloped surfaces. It provides exceptional wear and tear resistance required in high traffic areas.
- Formulated for use in expansion joints in sidewalks, swimming pool decks, plazas, control joints, floors and any other horizontal surfaces with slopes up to 6% (e.g. 1' rise for every 16' run).
- Traffic rated, pourable, semi-self-leveling sealant with exceptional primerless adhesion and movement capability.
- Suitable for continuous immersion in non-chlorinated water.
- Smoke Stop for Partition Joints & Penetrations
- Jet Fuel Resistant
- Has a unique capability to adhere to damp or green concrete.
-
(Mulco) Supra Expert Thermoplastic sealant. This sealant is flexible, durable and skins quickly. Good adhesion to vinyl, aluminium, brick, fibreglass and glass.
- Formulated to seal outdoor joints between two perpendicular surfaces exposed to thermal movement around door and window frames, sidings and glass in window frames.
- Super adhesion on concrete, masonry, painted or stained wood, natural, painted or anodised aluminum, steel, galvanized steel, metal, glass, fibreglass and vinyl (PVC).
- Can be painted
- Remarkable choice of colours
- Ease of use
-
(Tremco) 830 is a one part thermoplastic elastomer-based sealant. Provides adhesion to aluminum, vinyl and glass.
- Tremco 830 is used for face bedding, cap beads and sealing miter joints in window profiles.
- For siding applications, use with sill trim, flashings, fascia, J-trim, F-channel, and crown molding.
- Also used for sealing the perimeters of wood, PVC, and aluminum residential windows and doors.
- Wide range of colors to match the popular siding and window tints.
- Fast skinning, fast cure through.
- Easy gunning.
- Excellent weather and UV resistance.
- Can be painted
-
Tremco Acoustical/Curtainwall Sealant was developed for acoustical sealing of drywall/gypsum board partitions, curtainwalls, corridors and party walls.
- Used as a lap joint and perimeter sealant for polyethylene vapour barriers over fiberglass batt or other insulations.
- The application of Tremco Acoustical Sealant greatly increases the Sound Transmission Class (STC value) of a wall and reduces the decibel level when one or more beads are applied.
- May be used in contact with polystyrene.
- Also used as Curtainwall Sealant which is used to seal Lap Joints commonly found in metal work within curtainwalls and other similar situations.
-
(Tremco) Spectrem 2 Neutral cure +/- 25% Movement Silicone sealant used for caulking, glazing and structural glazing, resists severe environmental conditions and temperature fluctuations.
- Ideal for a variety of perimeter caulking and glazing applications, including 2-sided structural glazing.
- May be used on substrates such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick.
-
(Tremco) Spectrem 3 Silicone Hybrid Neutral cure +/- 50% movement, low modulus for caulking window perimeters, stucco and expansion joints where high movement may be encountered. Spectrem 3 puts minimum stress on the bond line during movement.
- Specifically formulated to seal porous and non-porous substrates..
- Low polar attraction to dirt makes buildings easier to clean and maintain.
- Low-modulus and low Shore A hardness reduce chance of EIFS substrate failures when compared to applications with medium-modulus sealants.
- Primerless adhesion to most porous substrates.
- Extended tooling time and workability in high temperatures.
- Ease of use reduces the risk of application failure.
- Matte finish affords an aesthetically pleasing appearance.
- No cure inhibition with Spectrem 1, Spectrem 2, Dymonic® FC when applied "wet-to-wet," minimizing the chance of leakage when sealants abut at glazing and other façade intersects.
- Low-VOC and zero-solvent content satisfies the LEED Indoor
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
(Tremco) Proglaze is a Glazing & Construction silicone sealant with excellent adhesion to glass, porcelain & metal. Proglaze is an acetoxy moisture cure with a +/- 25% movement.
- Proglaze produces a high-performance seal for a wide variety of glazing applications such as cap bead and metal-to-metal joints.
- Produces durable, flexible seal.
- Moisture curing and easily gunned in all types of weather conditions.
- Selected colours (Proglaze Clear, White, Aluminum and Black) are acceptable for indirect contact of edible products under USDA requirements for use in federally inspected meat and poultry plants.
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
(Tremco) Tremsil 200 is a Low cost, general purpose silicone sealant. It is an Acetoxy with +/- 25% movement. It cures to a flexible rubber.
- Produces a weathertight seal to glass, metal, porcelain, ceramic and most painted surfaces.
- Suitable for use in kitchens, bathrooms, spas and similar applications where joints need protection against fungi and bacteria.
-
(Tremco) Tremsil 400 can handle up to 40% expansion and contraction making it ideal for high-performance sealant applications. Tremsil 400 is extremely low in VOCs and can be used in any VOC regulated areas across the U.S. and Canada.
- Primerless adhesion for most construction materials reduces installation time for typical construction substrates such as wood, concrete, brick, vinyl, aluminum and most durable paint finishes.
- Specifically designed to achieve a watertight seal in expansion joints, and for general perimeter caulking of windows, doors and frames, precast and tilt-up panels.
- Medium modulus with capability to handle up to 40% expansion and contraction, making it ideal for use in dynamically moving joints.
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
(Tremco) Neutral cure. Tremsil 600 has excellent adhesion to PVC, plastic, stainless steel, aluminium & glass. It is ideal for use as an in-plant glazing sealant for applications that include back-bedding, cap, heel and toe beads, and sash joinery.
- Tremsil 600 is compatible with most common porous and non-porous building components and has excellent adhesion to aluminum, stainless steel, metals, glass, plastics, rigid PVC’s, wood, brick, concrete and painted surfaces.
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
(Tremco) High quality siliconized latex acrylic that can be painted with latex paint.
- Tremflex 834 can be used for general purpose interior and exterior caulking and as a back-bedding glazing compound.
- It is also highly recommended as an acoustical seal in the construction of interior walls, ceilings and floors.
- It is suitable for use on vinyl, aluminum and wood siding as well as on bathroom and kitchen fixtures.
- “Silicone Tough” latex acrylic formulation for outstanding exterior performance against the elements.
- Developed for flexibility and crack proof performance, this sealant endures expansion and contraction without cracking or losing its seal.
- Tack-free in 15 min and ready to paint in 30 to 45 min with latex or oil-based paint
- The paintable, durable sealant can fill gaps up to 1″ wide and the cured sealant is mold and mildew resistant.
-
480 Premium Polyurethane Construction Adhesive, for interior and exterior produces a permanent overnight bond to almost any substrate in all climates. It is waterproof and paintable.
- It is specially designed for water-resistant assemblies of substrates such as masonry, metal, composition board, gypsum board, most foam insulations including EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and polysio (Urethane), wood, hardwood flooring, concrete, stone, marble, slate, drywall and mirrors.
- Also popular on: trailers, trucks, truck bodies, rail cars, containers, buses, marine, RV, horse trailers, manufactured housing, emergency vehicles.
-
Kwik-Seal Kitchen and Bath Acrylic Latex is mildew-resistant waterproof and paintable. It has excellent adhesion and is flexible.
- Easy-to-use, multi-purpose adhesive caulk.
- Ideal for caulking and sealing in the bathroom and kitchen
- Specially formulated to provide a watertight seal around tubs, sinks, showers, and countertops
- Cured caulk is mold and mildew-resistant
- Tack-free in 15 minutes
- Resists abrasive chemicals
- Easy water clean-up
- Paintable
-
Soft Type Backer Rod is a soft, non-gassing, pliable, bi-cellular backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants and also helps sealant to assume the optimum hour-glass shape. Sealants will not adhere to it; no bond breaker is required. This is why the soft rod is a popular choice. Soft Type Backer Rod is especially suited for applications with irregular and varying joint widths where standard closed cell backer rods are not appropriate and where bubbling concerns are critical. The soft rod may also be used in place of standard closed-cell backer rod in most applications. Common applications for the soft backer rod include expansion and contraction joints, window glazing, curtain wall construction partitions, parking decks, bridge and highway construction pavement maintenance, and log home chinking. A backer rod is used for the following:
- Saves caulking material by controlling depth in the gaps of most joints
- Around doors, windows, wall joints and foundations
- Concrete precast building
- Provides additional insulation
- Blocks drafts
- Creates the required Hour Glass shape and depth for all joint sealants
CLOSED CELL BACKER ROD ALSO IN STOCK
-
A backer rod is used for concrete precast building. Backer rods are inserted between the concrete panels to fill the gap, thus providing a ‘backer’ for the caulking that is applied. These backer rods can be used around doors, windows, wall joints, as well as foundations. The closed cell backer rod is best in horizontal or flat joints. Backer Rod performs as a depth control for most known cold applied sealants and also helps sealant to assume the optimum hour-glass shape. A backer rod is used for the following:
- Saves caulking material by controlling depth in the gaps of most joints
- Around doors, windows, wall joints and foundations
- Concrete precast building
- Provides additional insulation
- Blocks drafts
- Creates the required Hour Glass shape and depth for all joint sealants
SOFT TYPE BACKER ROD IS ALSO IN STOCK
-
Dispenses 300ml, 600ml or 800ml sausage packs. Can be converted to dispense Bulk or Cartridges with parts included. For dispensing in difficult situations consider using the Bent Plastic Cone Nozzle. Gun replacement parts are also available!
-
IPF GREEN is a single component polyurethane foam used to seal around windows, doors and unwanted cracks and gaps in a building envelope. It is an excellent air barrier and has natural additive to fend off rodents and insects. IPF GREEN is made from an MDI Monomer, uses environmentally friendly propellant and contains a Fire Retardant.
- CCMC Approved
- Excellent cell structure
- Green in colour, for easy identification
-
UltraSeal Straw Foam New Formulation! UltraSeal® PF-50 for Extreme Weather is a low expansion, one-component polyurethane foam.
- It is UL classified and designed to be used with a straw dispenser.
- It is ideal for general sealing of gaps, holes and crevices in EXTREME temperature conditions all year round.
- UltraSeal® PF-50 is a foam system that can be used without a gun dispenser.
-
Tremco 440 Butyl Sealant Tape Preformed for non-compression glazing or as a lap joint sealant. Excellent adhesive for retaining walls and paver’s. Some Standard Sizes Include Most common sizes are stocked
1/8" x 3/8" Alum., Black 1/8" x 1/2" Alum. 1/8" x 3/4" Alum. 1/8" x 1" Alum. 1/8" x 2" Alum. 1/16" x 1/4" Alum., Black 1/16" x 3/8" Alum., Black 1/16" x 1" Alum., Black -
Tremco Polyshim 11 Glazing Spline is designed to be used on the opposite side of the glass in windows when using Polyshim II Tape where a wedge of spline is required to compress the tape to the shim. Specially developed wedge gasket for use with Polyshim II glazing tape. P78 .160 - 500' roll P80 .120 - 500' roll P81 .200 - 500' roll
-
Tremco POLYshim II Glazing Tape is High-Performance Glazing Tape. It has a continuous built in shim. Double and Single sided Poly foam Tape available.
- POLYshim II Tape is used in compression glazing systems wherever the design calls for high-performance glazing of curtain wall, unitized curtain walls, punched and ribbon window systems, and sloped glazing applications.
-
We carry Polyfoam Tape which is generally used for glazing interior glass partitions. Double sided and single adhesive polyethylene tape, light weight for secondary seal in exterior glazing. Sizes Available c/w release paper Double sided 1/16” x 3/8” – 150’ Roll Double sided 1/8” x 3/8” – 75’ Roll Single sided 1/8” x 3/8” – 50’ Roll Single sided 1/4” x 3/8” – 50’ Roll
-
Extruded from SCR, and Grooved available. Cushions and supports glass, acts as a centering device for glass installed in channels. Withstands vibration, shock, and heavy wind Setting Blocks SCR Pieces 1/16″ x 1″ x 4″ 750 pcs/cs 1/8″ x 1″ x 4″ 750 pcs/cs 3/16″ x 1″ x 4″ 750 pcs/cs 1/4″ x 1″ x 4″ 750 pcs/cs Setting Blocks SCR Grooved Pieces 1/4″ x 1″ x 4″ Grvd 750 pcs/cs Setting Blocks SCR Rolls 1/4″ x 1″ x 50′ 300′ rolls/cs 3/16″ x 1″ 50′ 200′ rolls/cs 1/8″ x 1″ 50′ 400′ rolls/cs 1/16″ x 1” x 50′ 400′ rolls/cs
-
Glazelock Horseshoe Shims High quality plastic shims are cost saving solutions to your building needs. Plastic Interlocking 3″ x 4″ x 1/16″ – (1000 Shims per box) Blue 3″ x 4″ x 1/8″ – (500 Shims per box) Red 3″ x 4″ x 1/4″ – (400 Shims per box) Black
New Tapered Wedge Shim Easy To Nail
This new cost effective shim has its own unique gripping system. It breaks off clean and can easily be nailed through.- Made of Recycled Plastic
- Resists Splitting
- Waterproof
- No Rotting
-
Fine Grit = 80 grit and HIGHER 1-1/8″ wide x 21″ long (40 per bundle) 80 grit 120 grit 400 grit 4″ wide x 106″ long (10 per bundle) 80 grit 120 grit 400 grit 4″ wide x 24″ long (10 per bundle) 120 grit
-
Sanding Belts Coarse Grit = 60 grit and LOWER 1-1/8″ wide x 21″ long (40 per bundle) 60 grit 4″ wide x 106″ long (10 per bundle) 60 grit
-
Tremco Proglaze® SSG is a one-part, high-modulus, neutral cure silicone sealant ideal for a wide variety of glazing applications. Proglaze SSG provides high-performance capabilities for structural glazing as well as an exceptionally fast cure.
- Designed to meet the stringent performance needs for both 2- and 4-sided structural and protective glazing, including cap, heel or toe bead.
- Fast through cure and exceptional tensile strength to meet the most stringent building codes.
- High modulus produces a tough, flexible rubber cure for a tenacious, watertight seal.
- Provides the excellent adhesion, fast through-cure and exceptional tensile strength and flexibility critical to withstanding wind cycle loads and missile impacts.
- Impact/hurricane tested to the industry's most stringent performance standards, including Miami/Dade Protocol.
- Successfully tested structural anchor in retrofit Blast Film applications.
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
Self-Adhered Air and Vapour Barrier Membrane ExoAir® 110AT is a 22-mil composite impermeable membrane that is comprised of 16 mils of butyl and 6 mils of HDPP facer.
- Primerless application allows for faster installation time.
-
TREMstop Fyre-Sil is a gun-grade, neutral-cure silicone sealant designed for use in fire stopping applications, including both joints and through-penetrations.
- TREMstop Fyre-Sil is for use on metal pipe, plastic pipe, cables, cable trays, ducts and multiple through penetrations
- Static joints and dynamic joints in concrete, wood floor/ceiling and gypsum wall assemblies and perimeter fire barrier joints.
- A firestop product that also provides protection against washout conditions.
- Smoke Stop for Partition Joints & Penetrations
Sizes Available in SL (Self Leveling) Rust Red 600 ml. sausg. (15/cs) 850 ml. cart. (12/cs) 19-L pail (1/cs) -
An Acrylic Latex Firestop Sealant TREMstop® Acrylic is a gunnable acrylic latex sealant designed for use in firestop applications, including both joints and through-penetrations.
- For use on metal pipe, plastic pipe, insulated pipe, cables, cable trays, ducts, static joints and dynamic joints in fire-rated concrete, wood floor/ceiling and gypsum wall assemblies.
- TREMstop Acrylic can also be used on acoustically rated assemblies.
- Smoke Stop for Partition Joints & Penetrations
- An easy to apply, all-purpose sealant that accepts paint once fully cured.
- Excellent movement and superb unprimed adhesion to a wide range of substrates.
- When installed in accordance with a tested firestop system, it affords code compliance for both through-penetrations and fire-rated joints.
-
Non-combustible stone wool insulation with melting point of approx. 1177°C (2150°F) Used as the Fire Stop. Mineral Wool is used in conjunction with a fire material to prevent passage of fire and smoke. Pre-cut. This batting is designed for commercial, industrial, and residential buildings as a fire stopping insulation. It is compliant with CAN/ULC-S115. Pre Cut Sizes 2″ x 4″ x 48″ – 192′ lineal feet/bale 48 in a bale 4″ x 4″ x 48″ – 96′ lineal feet/bale 24 in a bale
-
S-600 Patio Screen Door Handle Multi Part Lock. Replacement Lock Sets Includes:
- Exterior Pull
- Interior Locking Handle with Slide and Strike
- Keeper and Screws
-
Webco Sealants offers replacement window screens to Glass Shops and contractors.
- Our standard colour choices are White, Commercial Brown & Mill. Special Colours available, Some colours have a premium charge
- Choose screen bar sizes from 1/4" Extruded; or 3/8" ; 5/16"; 7/16" Roll-formed bar.
- Choose Straight Cut Plastic Corners or Mitre Corners
- Choose Fiberglass Screen, Aluminum, or Pet Screen, Better Vue or Ultra Vue
-
PATIO SCREEN DOOR REPLACEMENTS FULLY ASSEMBLED - SCREEN CLOTH INCLUDED. Choice of Colour, Size, and Screen Cloth Type: Fiberglass, Aluminum, Or Pet Screen KITS UNASSEMBLED - SCREEN CLOTH NOT INCLUDED
- Webco Standard Kit - Size 36 1/2" wide x 81" high
- Custom Sized Kits - regular or oversized extrusion available. Choice of Colour, and Size
-
Webco Sealants Ltd. is the exclusive Ontario Distributor for "All Glass Parts", a supplier of Truth Hardware. We carry some of the most common "All Glass Parts" hardware for Casement Window and Patio Doors and More such as: Please contact us with your window and patio door hardware needs.
-
The Cox 51001 Sausage Gun is for the user that wants all the features of a Professional Tool but doesn't need maximum durability.
- Square rod that can be rotated 4 times for longer life
- Thumb activated instant pressure release
- Puncture wire
- All steel construction
- Replaceable parts
-
DAP® ‘33’® Window Glazing is a ready-to-use glazing compound that may be used for face glazing wood or metal sash. Its knife-grade quality allows for smooth, easy application. DAP® ‘33’® Glazing sticks tight to glass and sash for an airtight, watertight seal that resists sagging, shrinking, chalking and cracking. It stays flexible throughout minor expansion and contraction and outlasts ordinary putty. Available Sizes 237 ml 1/2 pint (12/cs) White 946ml 1 Quart (6/cs) 3.78 L 1 gallon (2/cs) White
-
Black Plastic Cone Nozzles For Sausage/Bulk Guns
• Easy to cut and size with utility knife • Generally used for one application and discarded • Fits all Albion B-Line and similar sausage guns Nozzles are sold individually or in a sleeve of 10
Bent Cone Nozzles For Sausage/Bulk Guns
- Easily cuts to size with utility knife
- Fits B-Line sausage guns such as the B12S20 with black plastic front cap
- Nozzles are bent at 45 degree angle to give you additional reach and the ability to get around corners.
- Reduces strain by eliminating the need to hold dispensing guns at uncomfortable angles
- Trim with a utility knife to desired size and shape opening
Fine Cone Nozzles For Sausage/Bulk Guns
- Easily cuts to size with utility knife
- Generally used for one application and discarded
- Fits all B-Line and similar sausage guns with ring cap
Structural Glazing Nozzles For Sausage/Bulk Guns
Designed to save time during structural glazing, this nozzle allows the sealant to be applied to both sides of a structural silicone joints at the same time!- Less mess with more even application.
- Fits both bulk guns and sausage (sachet) guns.
- Tip comes uncut – simply cut desired hole size on either side.
Angle Shot Green Plastic Nozzle
Extends any plastic cartridge nozzle to dispense in difficult situations.
- Total length is 7". Base is 4.5" then turns 45 degrees and extends another 2.5".
- Fits on top of many standard 1/10th gal. and quart cartridge nozzles *or* inside a standard Cone Nozzle
-
Green Bent Plastic Cone Nozzles for Bulk Guns. Easily cuts to size with utility knife, and fits all standard size Albion bulk guns.
- Fits B-Line sausage guns such as the B12S20 with black plastic front cap
- Nozzles are bent at 45 degree angle to give you additional reach and the ability to get around corners.
- Reduces strain by eliminating the need to hold dispensing guns at uncomfortable angles
- Trim with a utility knife to desired size and shape opening
-
Fine Plastic Cone Nozzles for Bulk Guns. Easily cuts to size with utility knife, and fits all standard size Albion bulk guns.
- Generally used for one application and discarded
- Fits all B-Line and similar sausage guns with ring cap
-
Sprayway foaming glass cleaner is everyone's favourite glass cleaner.
- No dripping or streaking. Removes dirt, grease and grime.
- Scent: Clean Fresh
- Ammonia free
- Ready to use formula
- Recommended for:
-
- Stainless steel
- Chrome
- Mirrors
- Tile
- Plastic
- Ceramic
- Enamel
-
- 19 oz/539 ml can: 12 cans/case
-
Thermalbond® V2200 series is a High-Strength, Polyurethane Foam Spacer For Structural Glazing specially designed to provide the following features: • Open-cell structure allows air and moisture to reach the silicone for optimum curing of the silicone • Semi-rigid polyurethane foam is compatible with all silicone tested • Low thermal conductivity improves the performance of the wall and can support LEED points • Excellent resistance to temperature variations, fungi and oxidation APPLICATIONS • Spacer for two and four sided structural glazing systems Some Standard Sizes Include Most common sizes are stocked. Inquire for other sizes. 1/8" x 3/8" 1/8" x 1/2" 1/8" x 1" 1/4" x 1/4" 1/4" x 3/8" 1/4" x 1/2" 3/8" x 3/8"
-
Lubri-Clean will clean UNCURED foam from guns, surfaces, etc.
- Dissolves gun and tank foam before it cures
- It is used to clean and lubricate guns as well as clean foam from unwanted areas
- Cleans foam from unwanted areas
- An essential accessory for gun maintenance
- Can be used as an aerosol or attached to gun
- 340ml/12oz can: 12 cans/case
INSTRUCTIONS The can is designed to be installed directly onto a foam applicator gun but it also has a spray nozzle just like any other aerosol canister. Proper installation of the cleaner on a foam gun is essential. It simply screws on just like a foam can. You can also use the included plastic straw to use it anywhere else you may have undesired foam.
- While pointing applicator in garbage container, depress trigger and quickly unscrew foam can
- Remove adapter from collar and insert valve on top of cleaner can
- Thoroughly spray applicator basket
- Remove cleaner adapter and screw can onto foam applicator
- Flush thoroughly, allowing the cleaner to soak in the applicator barrel for 15 minutes
- Flush again
-
- 300 ml cartridges
- Full sized handle for comfortable grip
- Half-cradle carriage to securely hold standard size sealant cartridges
- Built-in cartridge puncture wire
-
Incorporates ladder hook, comfortable over-molded handle, and swivel barrel.
- 600ml sausage
- 400 lbs force dispensing power
- 12 volt Lithium-Ion battery - dispense 100+ cartridges on a single charge
- Variable Speed Trigger with max. speed dial and auto reverse for no-drip
- Lighter Drive & Battery plus aluminum barrel. 30% lighter than our comparable 18V models
- Dispense a 600ml sausage in as little as 25 seconds (5/8" nozzle opening)
-
Replacement Battery for Albion Cordless Power Sausage Gun 12V (E12S20)
-
This caulk gun has a heavy-duty 5/16" square drive rod, driven by a pair of hardened steel grip plates. Rotating 30oz (18" long) steel barrel for convenience and durability. Comfortable epoxy coated handle. Double set of oiled leather pistons stiffened by a trio of steel washers for reliable suction during loading and dispensing.
- Heavy duty 5/16" square drive rod, driven by a pair of hardened steel grip plates
- Rotating 600ml (14" long) steel barrel for convenience and durability
- Comfortable epoxy coated handle
- Double set of oiled leather pistons stiffened by a trio of steel washers for reliable suction during loading and dispensing
- Conical ejector for more complete dispensing.
- Standard 1/2" ID round metal nozzle
- Threaded steel front cap
- Gun Lengths
- Empty: 23.5"
- Full: 37.5"
-
Wood's Powr-Grip Glass Flat Vacuum Suction Cup (8'') (Plastic Handle)
- Fast attach and release
- Red-line indicator warns user of any significant vacuum loss
- Lifting Capacity: 125 lbs (57 kg)
- Cup Diameter: 8''
- Designed to make carrying of large sheets of glass easy.
- Vacuum attachment to non-porous surfaces is achieved by repeatedly depressing the pump plunger until it stays well within the handle beyond the red band.
- Once the attachment has been achieved, the glass sheet can be easily lifted.
- The rubber cup has the capability of handling almost any manual lift without damaging most delicate surfaces
- Carrying case is included.
- Flat Vacuum Cup Replacement Parts Available
- Replacement Pads
- Handle For Vacuum Cup (w Valve) (ABS)
- Valve Release Lever
- Air Filter
- Check Valve
- Check Valve Retainer
- And more
-
Weatherstrip for Sliding Screen Doors R-511 Vinyl Bug Strip Black available. (In Stock)
- 7′ length.
- 1 1/4″ wide
- This comes standard on our Assembled Patio Screen Doors.
- 7′ length.
- 2″ wide
- This fits onto our Assembled Patio Screen Doors when Pile Strip is requested.
- 7 ft standard length.
- 1/2" pile in Black
- This fits onto our Assembled Patio Screen Doors when Pile Strip is requested.
- 7 ft standard length.
- 1/2" pile in Black or White
-
-
Tremco ET 675 is a 100% solid, cross-linked preformed (extruded) butyl tape. It is non-oxidizing, non-film forming, and provides exceptional flow resistance when subjected to vibration.
- Concrete to concrete seals
- Glass to metal seals.
- Used to separate dissimilar metals to prevent galvanic action, and seal out moisture and air infiltration for roof and side panel lap joints.
- Exhibits superior adhesion to a wide variety of treated and untreated surfaces including metal, wood, glass, and plastic surfaces.
- Used widely in the farming industry to seal Grain Bins.
-
VISIONstrip® is a precision-extruded glazing seal consisting of an EPDM rubber extrusion positioned at the sightline with a 100% solids, highly adhesive, cross-linked performed butyl sealant bonded below the rubber extrusion.
- A single component profile achieving a positive-wet seal between the metal and glass surfaces while providing a clean gasket appearance at the sightline.
- Used in compression glazing systems wherever the design calls for high performance glazing of curtain wall, unitized curtain walls, punched and ribbon window systems and sloped glazing applications.
-
Rapid Patch Roof Repair Bituminous caulking stops roof leaks. Adheres to wet or dry surfaces. For exterior use.
- Seals shingles and flashings or small holes in foundations before the application of the foundation coating.
- Can seal small gaps with a diameter less than 6 mm (¼ in.)
-
Designed to save time during structural glazing, this nozzle allows the sealant to be applied to both sides of a structural silicone joints at the same time!
- Less mess with more even application.
- Fits both bulk guns and sausage (sachet) guns.
- Tip comes uncut - simply cut desired hole size on either side.
-
NuFlex® 302 High-Temperature Silicone is a non-sag caulking material which cures to form a sturdy, rubbery solid upon exposure to moisture in the air. It is formulated to perform at temperatures ranging from -65° to 260°C (-85° to 500°F) under continuous operating conditions. During intermittent exposure, NuFlex® 302 High Temperature will withstand temperatures as high as 316°C (600°F).
- Industrial Hi-Temp Form-in-Place gasket maker
- Mechanical assemblies in high temperature environments.
- Appliance gaskets
- Ductwork sealer/adhesive
- Electrical insulation
- Air conditioner and humidifier gaskets
- High temperature spacers
- Water pump and compressor gaskets