Silicones with High Performance

//Silicones with High Performance
  • (Tremco) Spectrem 2 Neutral cure +/- 25% Movement Silicone sealant used for caulking, glazing and structural glazing, resists severe environmental conditions and temperature fluctuations.
    • Ideal for a variety of perimeter caulking and glazing applications, including 2-sided structural glazing.
    • May be used on substrates such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick.
    Available Colours Available in all standard colours COLOUR CHART SPECTREM PDF Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • (Tremco) Spectrem 3 Silicone Hybrid Neutral cure +/- 50% movement, low modulus for caulking window perimeters, stucco and expansion joints where high movement may be encountered. Spectrem 3 puts minimum stress on the bond line during movement.
    • Specifically formulated to seal porous and non-porous substrates..
    • Low polar attraction to dirt makes buildings easier to clean and maintain.
    • Low-modulus and low Shore A hardness reduce chance of EIFS substrate failures when compared to applications with medium-modulus sealants.
    • Primerless adhesion to most porous substrates.
    • Extended tooling time and workability in high temperatures.
    • Ease of use reduces the risk of application failure.
    • Matte finish affords an aesthetically pleasing appearance.
    • No cure inhibition with Spectrem 1, Spectrem 2, Dymonic® FC when applied "wet-to-wet," minimizing the chance of leakage when sealants abut at glazing and other façade intersects.
    • Low-VOC and zero-solvent content satisfies the LEED Indoor
    • Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
    Available Colours Available in a wide range of architectural colours. Ask about special colour orders for this silicone sealant. COLOUR CHART SPECTREM PDF Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • (Tremco) Proglaze is a Glazing & Construction silicone sealant with excellent adhesion to glass, porcelain & metal. Proglaze is an acetoxy moisture cure with a +/- 25% movement.
    • Proglaze produces a high-performance seal for a wide variety of glazing applications such as cap bead and metal-to-metal joints.
    • Produces durable, flexible seal.
    • Moisture curing and easily gunned in all types of weather conditions.
    • Selected colours (Proglaze Clear, White, Aluminum and Black) are acceptable for indirect contact of edible products under USDA requirements for use in federally inspected meat and poultry plants.
    • Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
    Available Colours Clear, White, Aluminum, Black, Dark Bronze (Dark Bronze is not food grade) Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • (Tremco) Tremsil 200 is a Low cost, general purpose silicone sealant. It is an Acetoxy with +/- 25% movement. It cures to a flexible rubber.
    • Produces a weathertight seal to glass, metal, procelain, ceramic and most painted surfaces.
    • Contains fungicide.
    • Suitable for use in kitchens, bathrooms, spas and similar applications where joints need protection against fungi and  bacteria.
    Available Colours Available in all standard colours Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • (Tremco) Tremsil 400 can handle up to 40% expansion and contraction making it ideal for high-performance sealant applications. Tremsil 400 is extremely low in VOCs and can be used in any VOC regulated areas across the U.S. and Canada.
    • Primerless adhesion for most construction materials reduces installation time for typical construction substrates such as wood, concrete, brick, vinyl, aluminum and most durable paint finishes.
    • Specifically designed to achieve a watertight seal in expansion joints, and for general perimeter caulking of windows, doors and frames, precast and tilt-up panels.
    • Medium modulus with capability to handle up to 40% expansion and contraction, making it ideal for use in dynamically moving joints.
    • Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
    Available Colours Available in all standard colours COLOUR CHART TREMSIL 400 PDF Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • (Tremco) Neutral cure. Tremsil 600 has excellent adhesion to PVC, plastic, stainless steel, aluminium & glass.  It is ideal for use as an in-plant glazing sealant for applications that include back-bedding, cap, heel and toe beads, and sash joinery.
    • Tremsil 600 is compatible with most common porous and non-porous building components and has excellent adhesion to aluminum, stainless steel, metals, glass, plastics, rigid PVC’s, wood, brick, concrete and painted surfaces.
    • Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
    Available Colours Available in White and Clear. (Other colours are available upon request.) Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • Tremco Proglaze® SSG is a one-part, high-modulus, neutral cure silicone sealant ideal for a wide variety of glazing applications. Proglaze SSG provides high-performance capabilities for structural glazing as well as an exceptionally fast cure.
    • Designed to meet the stringent performance needs for both 2- and 4-sided structural and protective glazing, including cap, heel or toe bead.
    • Fast through cure and exceptional tensile strength to meet the most stringent building codes.
    • High modulus produces a tough, flexible rubber cure for a tenacious, watertight seal.
    • Provides the excellent adhesion, fast through-cure and exceptional tensile strength and flexibility critical to withstanding wind cycle loads and missile impacts.
    • Impact/hurricane tested to the industry's most stringent performance standards, including Miami/Dade Protocol.
    • Successfully tested structural anchor in retrofit Blast Film applications.
    • Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
    Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • TREMstop Fyre-Sil is a gun-grade, neutral-cure silicone sealant designed for use in fire stopping applications, including both joints and through-penetrations.
    • TREMstop Fyre-Sil is for use on metal pipe, plastic pipe, cables, cable trays, ducts and multiple through penetrations
    • Static joints and dynamic joints in concrete, wood floor/ceiling and gypsum wall assemblies and perimeter fire barrier joints.
    • A firestop product that also provides protection against washout conditions.
    • Smoke Stop for Partition Joints & Penetrations
    Sizes Available in Rust Red and Limestone 300 ml. cart. (30/cs) 600 ml. sausg. (15/cs) 19-L pail   Sizes Available in SL (Self Leveling) Rust Red 600 ml. sausg. (15/cs) 850 ml. cart. (12/cs) 19-L pail (1/cs)  
    Product Data Sheet
    Product Data Sheet For Self-leveling
    Get a Quote
  • Self-Seal GG-266  is a single-component, neutral cure, non-slumping intumescent silicone caulk that is designed to seal combustible service penetrations in fire-rated walls and floors.  As the combustible penetrating item softens and collapses under fire conditions, the firestop sealant will expand to fill the voids left when combustible materials burn and deteriorate in a fire. It swells when heated, sealing a gap, protecting material underneath in the case of a fire.
    • Non-sag silicone
    • Water-resistant before, during, and after cure
    • Freeze-thaw stable
    • Protects your wall & floor openings
    • Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation
    • Self-Seal GG-266 has achieved GREENGUARD GOLD Certification
    Available Sizes with Colours 300 ml. cart. (12/cs)- Rust Red 600 ml. sausg. (12/cs)-Rust Red
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F).
    • Bathtubs
    • Shower stalls
    • Bathroom vanities
    • Kitchen counters and sinks
    • Replacing ceramic tiles and freezers
    • Water-resistant before, during, and after cure
    • RTV (Room Temperature Vulcanization)
    • Mildew resistant
    • 50-year durability
    • Can be applied in sub-zero temperatures
    • NuFlex 302 has achieved GREENGUARD GOLD Certification
    Available Sizes and Colours 300 ml. cart. (12/cs)- Clear 300 ml. cart. (12/cs)- White Other colours may be available on request such as Bone and Almond 
    Product Data Sheet 302 Bath & Kitchen
    Safety Data Sheet 302 Bath & Kitchen Clear
    Get a Quote
  • NuFlex® 302 General Purpose Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It cures to form a sturdy, rubbery solid upon exposure to moisture in the air. Due to its non-sag properties, the sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It adheres to most non-porous construction substrates. NuFlex® 302 has excellent resistance to weathering, vibration, moisture, ozone, and extreme temperatures. It may be applied in sub-zero temperatures without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F)
    • Form-in place gaskets where there is no oil contact
    • Duct joints
    • Areas that need weather stripping
    • Sinks, basins, showers, and tubs
    • Can be applied in sub-zero temperatures
    • Water-resistant before, during, and after cure
    • RTV (Room Temperature Vulcanization)
    • Adheres to many substrates
    • Wide temperature range performance
    • 50-year durability
    • Can be applied in sub-zero temperatures
    • NuFlex 302 has achieved GREENGUARD GOLD Certification
    Available Sizes and Colours 300 ml. cart. (12/cs)- Clear 300 ml. cart. (12/cs)- White
    Product Data Sheet 302 General Purpose
    Safety Data Sheet 302 General Purpose
    Get a Quote
  • Nuflex® 331  is a primerless, non-corrosive, low modulus, neutral cure sealant that exhibits high adhesive qualities when cured. NuFlex® 331 excels at bonding PVC and other plastics and is unaffected by UV and airborne chemicals. Used in butt joints and in exterior weatherproofing applications subject to movement. Can also be used in mirror backing applications.
    • Sealing joints between window frames and siding.
    • Glazing and installation of steel, aluminum, fiberglass and wood windows
    • General caulking of vents, window and door frames
    • Exterior Weatherstripping
    • Used as adhesive to hang mirrors
    • NuFlex 302 has achieved GREENGUARD GOLD Certification
    Available Sizes and Colours 300 ml. cart. (12/cs)- Clear
    Product Data Sheet 331 Exterior
    Safety Data Sheet 331 Exterior
    Get a Quote