- POLYshim II Tape is used in compression glazing systems wherever the design calls for high-performance glazing of curtain wall, unitized curtain walls, punched and ribbon window systems, and sloped glazing applications.
-
Tremco POLYshim II Glazing Tape is High-Performance Glazing Tape. It has a continuous built in shim. Double and Single sided Poly foam Tape available. -
PURFECTSEAL is a single-component, moisture-curing, low-expansion gun foam, which has good cold weather gun ability. It is specially formulated to be ‘O‐Zone’ friendly and is extremely economical — ideal for weather applications down to ‐10°C.- General sealing around windows and doors
- General construction applications
- Gap filling in new & retrofit construction
- Ideal for weather applications down to ‐10°C.
- Compatible with standard professional foam dispensers
-
Rapid Patch Roof Repair Bituminous caulking stops roof leaks. Adheres to wet or dry surfaces. For exterior use.- Seals shingles and flashings or small holes in foundations before the application of the foundation coating.
- Can seal small gaps with a diameter less than 6 mm (¼ in.)
-
Available Sizes (4,000 ft Stock Length Rolls) .130 .155 -
Available Package Sizes S-428 Drilled Compression Springs are available in a package of 25 pieces. These are used with our assembled window screens. -
S-429 Corner Compression Springs are available in a package of 25 pieces. These are used with our assembled window screens. -
S-436 P-Turn Clips are available in a package of 25. M metal or P plastic These are secured to the window frame and turned to secure or remove the screen frame. S-436 M Metal P-Turn Clips 25/pk S-436 P Plastic P-Turn Clips 25/pk -
S-481M 1/4 inch Metal Spring Bolts are available in a package of 25 pieces. These are used with our assembled window screens. Available Package Sizes Metal 1/4″ 25/pk -
Available Package Sizes S485 P Spring Bolts – Plastic 3/16″ 25/pk -
S-486 Spring Bolts 1/8 inch are in available package size of 25 pieces in plastic or metal. These are used with our assembled window screens. Plastic 1/8″ 25/pk Metal 1/8″ 25/pk -
S-500 Screen Pulls for window screens for finger pulls. These are used with our assembled window screens. S500 Black Screen Pulls S500 B Screen Pulls – Black 50/pk S500 Clear Screen Pulls S500 C Screen Pulls – Clear 50/pk -
S-502 Press-On U-Clip 7/16" wide.- Plastic U-Clips secure window screen frames to windows.
-
S-503 Metal U-clips with Aluminum Mill Finish are available in a package of 25 pieces. U-Clips secure window screens, storm windows and storm door panels Available Package Sizes S503 U-clip metal 25/pk- S503 U-Clips secure window screens, storm windows and storm door panels
-
Available Package Sizes S-504 Turn Button 1/16 step 25/pk- Turn Clips are used to secure window screens, storm windows and storm door panels.
-
S-505 Brace Bar Clips Metal Available Package Sizes S-505 - 25/pk White Only -
S-501 Turn Buttons help secure the window screen in a window opening. These are sold in a package of 50 and are used with our assembled window screens.- S-501 Turn Buttons help secure the window screen in a window opening.
-
Standard Roll Formed Screen Frame And Corners
Standard colours are white, mill and commercial brown (premium colours are available upon request). See Lip Bar Below
3/8″ Frame
3/8″ high x 3/4″ wide x 12.5′ long.
Related corners available: Plastic and Internal Mitre
5/16″ Frame
5/16″ high x 3/4″ wide x 12.5′ long.
Related corners available: Plastic and Internal Mitre
7/16″ Frame
7/16′ high x 3/4″ wide x 12.5′ long.
Related corners available: Plastic and Internal Mitre
1/4″ Extruded Frame
1/4″ high x 3/4″ wide x 12′ long.
Mitre (Aluminum) corners for Extruded bar only
Also Available: Roll-formed Screen Bar with Lip and Corners – White only
S-128
3/8″ high x 3/4″ wide with 1/4″ lip (=1″ wide) 13.5′ long. Uses S-358P Plastic Corners or S-351 Mitre Corners Mill only.
S-129
3/8″ high x 3/4″ wide with 3/8″ lip (=1 1/8″ wide) 13.5′ long. Uses S-356P Plastic or S-351 Mitre Corners Mill only.
S-130
3/8″ high x 1/16″ wide with 5/16″ step lip (=1 1/8″ wide) 13′-6″ 13.5′ long. Uses S-357P Plastic or S-351 Mitre Corners Mill only.
Also Available:
Brace Bar and Clips (White Brace Bar Clips S505 click here)
.230 x .630” x 12’ White, Comm. Brown 1/4" high x 1/2" wide x 12' long
White Vinyl U Track
For 3/8” screen bar (7/16 “ x 7/16” x 12')
-
Extruded from SCR, and Grooved available. Cushions and supports glass, acts as a centering device for glass installed in channels. Withstands vibration, shock, and heavy wind Setting Blocks SCR Pieces 1/16″ x 1″ x 4″ 750 pcs/cs 1/8″ x 1″ x 4″ 750 pcs/cs 3/16″ x 1″ x 4″ 750 pcs/cs 1/4″ x 1″ x 4″ 750 pcs/cs Setting Blocks SCR Grooved Pieces 1/4″ x 1″ x 4″ Grvd 750 pcs/cs Setting Blocks SCR Rolls 1/4″ x 1″ x 50′ 300′ rolls/cs 3/16″ x 1″ 50′ 200′ rolls/cs 1/8″ x 1″ 50′ 400′ rolls/cs 1/16″ x 1” x 50′ 400′ rolls/cs -
Soft Type Backer Rod is a soft, non-gassing, pliable, bi-cellular backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants and also helps sealant to assume the optimum hour-glass shape. Sealants will not adhere to it; no bond breaker is required. This is why the soft rod is a popular choice. Soft Type Backer Rod is especially suited for applications with irregular and varying joint widths where standard closed cell backer rods are not appropriate and where bubbling concerns are critical. The soft rod may also be used in place of standard closed-cell backer rod in most applications. Common applications for the soft backer rod include expansion and contraction joints, window glazing, curtain wall construction partitions, parking decks, bridge and highway construction pavement maintenance, and log home chinking. A backer rod is used for the following:- Saves caulking material by controlling depth in the gaps of most joints
- Around doors, windows, wall joints and foundations
- Concrete precast building
- Provides additional insulation
- Blocks drafts
- Creates the required Hour Glass shape and depth for all joint sealants
CLOSED CELL BACKER ROD ALSO IN STOCK
-
Solvents IPA, MEK, Xylol and Mineral spirits used for removing dissolving, thinning, degreasing and cleaning paint and sealants are available.- IPA Uses :- Isopropyl Alcohol 90% - 100% is a Thinner / Reducer Liquid Extremely flammable liquid and vapour. Flammable. vapour may cause flash fire. harmful if inhaled or swallowed. Causes severe eye and skin irritation. Causes respiratory tract irritation. May be harmful if absorbed through skin. Contains material that may cause target organ damage, based on animal data.
- MEK Uses :- Methyl Ethyl Ketone is a degreaser Liquid used to remove adhesives and other coatings from surfaces. MEK can be used to remove residual glue, dirt, grease, paint, or older coating layers that are starting to erode. MEK is soluble in water and alcohol. Extremely flammable liquid and vapour. Flammable. vapour may cause flash fire. harmful if inhaled or swallowed. Causes severe eye and skin irritation. Causes respiratory tract irritation. May be harmful if absorbed through skin. Contains material that may cause target organ damage, based on animal data.
- Mineral Spirits Uses :- Petroleum spirits is a degreaser for cleaning equipment and thinning paints. It will dissolve gum and other sticky resins. Safe to use on wooden furniture with a lacquer or varnish finish
- Xylol Uses :- Xylol (Xylene) is an excellent solvent for cleaning tools and equipment immediately after use. Flammable liquid and vapor. Harmful in contact with skin or if inhaled. Causes serious eye irritation. Causes skin irritation. Suspected of causing cancer if inhaled. May be fatal if swallowed and enters airways. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure if inhaled. (ears)
-
(Tremco) Spectrem 1 Moisture cure Spectrem 1 is a high-performance, single-component, moisture-cure, ultralow modulus silicone sealant.- Ideal sealant for the most demanding dynamically moving joints.
- This includes material having a high coefficient of linear expansion such as aluminum curtainwalls, precast concrete panels, metal panels and window perimeters
- Ultra-low modulus means high elasticity with movement accommodation of +100/-50%.
- With excellent adhesion to a variety of substrates, one product can be used for multiple applications on the same job from perimeter caulking to expansion joints.
- An excellent choice for sealing difficult-to-adhere-to substrates, such as air barrier and polyethylene surfaces.
- Resistance to driving rain, ozone, ultra-violet light and temperature extremes safeguards against water penetration with exceptional weatherability in all climate zones.
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
(Tremco) Spectrem 2 Neutral cure +/- 25% Movement Silicone sealant used for caulking, glazing and structural glazing, resists severe environmental conditions and temperature fluctuations.- Ideal for a variety of perimeter caulking and glazing applications, including 2-sided structural glazing.
- May be used on substrates such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick.
-
(Tremco) Spectrem 3 Silicone Hybrid Neutral cure +/- 50% movement, low modulus for caulking window perimeters, stucco and expansion joints where high movement may be encountered. Spectrem 3 puts minimum stress on the bond line during movement.- Specifically formulated to seal porous and non-porous substrates..
- Low polar attraction to dirt makes buildings easier to clean and maintain.
- Low-modulus and low Shore A hardness reduce chance of EIFS substrate failures when compared to applications with medium-modulus sealants.
- Primerless adhesion to most porous substrates.
- Extended tooling time and workability in high temperatures.
- Ease of use reduces the risk of application failure.
- Matte finish affords an aesthetically pleasing appearance.
- No cure inhibition with Spectrem 1, Spectrem 2, Dymonic® FC when applied "wet-to-wet," minimizing the chance of leakage when sealants abut at glazing and other façade intersects.
- Low-VOC and zero-solvent content satisfies the LEED Indoor
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
Spline Rollers
Single Wheel Concave - Convex
-
Sprayway foaming glass cleaner is everyone's favourite glass cleaner.- No dripping or streaking. Removes dirt, grease and grime.
- Scent: Clean Fresh
- Ammonia free
- Ready to use formula
- Recommended for:
-
- Stainless steel
- Chrome
- Mirrors
- Tile
- Plastic
- Ceramic
- Enamel
-
- 19 oz/539 ml can: 12 cans/case
-
Black Plastic Cone Nozzles For Sausage/Bulk Guns
• Easy to cut and size with utility knife
• Generally used for one application and discarded
• Fits all Albion B-Line and similar sausage guns
Nozzles are sold individually or in a sleeve of 10
Bent Cone Nozzles For Sausage/Bulk Guns
- Easily cuts to size with utility knife
- Fits B-Line sausage guns such as the B12S20 with black plastic front cap
- Nozzles are bent at 45 degree angle to give you additional reach and the ability to get around corners.
- Reduces strain by eliminating the need to hold dispensing guns at uncomfortable angles
- Trim with a utility knife to desired size and shape opening
Fine Cone Nozzles For Sausage/Bulk Guns
- Easily cuts to size with utility knife
- Generally used for one application and discarded
- Fits all B-Line and similar sausage guns with ring cap
Structural Glazing Nozzles For Sausage/Bulk Guns
Designed to save time during structural glazing, this nozzle allows the sealant to be applied to both sides of a structural silicone joints at the same time!
- Less mess with more even application.
- Fits both bulk guns and sausage (sachet) guns.
- Tip comes uncut – simply cut desired hole size on either side.
Angle Shot Green Plastic Nozzle
Extends any plastic cartridge nozzle to dispense in difficult situations.
- Total length is 7". Base is 4.5" then turns 45 degrees and extends another 2.5".
- Fits on top of many standard 1/10th gal. and quart cartridge nozzles *or* inside a standard Cone Nozzle
-
Designed to save time during structural glazing, this nozzle allows the sealant to be applied to both sides of a structural silicone joints at the same time!- Less mess with more even application.
- Fits both bulk guns and sausage (sachet) guns.
- Tip comes uncut - simply cut desired hole size on either side.
-
UPPER and BOTTOM TRACKS 12′ lengths
SHOES
WHEELS AND LOCKS
-
(Mulco) Supra Expert Thermoplastic sealant. This sealant is flexible, durable and skins quickly. Good adhesion to vinyl, aluminium, brick, fibreglass and glass.- Formulated to seal outdoor joints between two perpendicular surfaces exposed to thermal movement around door and window frames, sidings and glass in window frames.
- Super adhesion on concrete, masonry, painted or stained wood, natural, painted or anodised aluminum, steel, galvanized steel, metal, glass, fibreglass and vinyl (PVC).
- Can be painted
- Remarkable choice of colours
- Ease of use
-
Available Sizes (4,000 ft Stock Length Rolls) .170 .180 .200 .215 .230
