-
S-486 Spring Bolts 1/8 inch are in available package size of 25 pieces in plastic or metal. These are used with our assembled window screens. Plastic 1/8″ 25/pk Metal 1/8″ 25/pk -
S-481M 1/4 inch Metal Spring Bolts are available in a package of 25 pieces. These are used with our assembled window screens. Available Package Sizes Metal 1/4″ 25/pk -
S-500 Screen Pulls for window screens for finger pulls. These are used with our assembled window screens. S500 Black Screen Pulls S500 B Screen Pulls – Black 50/pk S500 Clear Screen Pulls S500 C Screen Pulls – Clear 50/pk -
S-436 P-Turn Clips are available in a package of 25. M metal or P plastic These are secured to the window frame and turned to secure or remove the screen frame. S-436 M Metal P-Turn Clips 25/pk S-436 P Plastic P-Turn Clips 25/pk -
Lance Latches Left and Right are available in a package of 25 pieces. These are used with our assembled window screens. S423 Lance Latch Left 25/pk S424 Lance Latch Right 25/pk -
Available Package Sizes S-428 Drilled Compression Springs are available in a package of 25 pieces. These are used with our assembled window screens. -
S-429 Corner Compression Springs are available in a package of 25 pieces. These are used with our assembled window screens. -
S-505 Brace Bar Clips Metal Available Package Sizes S-505 - 25/pk White Only -
Non-combustible stone wool insulation with melting point of approx. 1177°C (2150°F) Used as the Fire Stop. Mineral Wool is used in conjunction with a fire material to prevent passage of fire and smoke. Pre-cut. This batting is designed for commercial, industrial, and residential buildings as a fire stopping insulation. It is compliant with CAN/ULC-S115. Pre Cut Sizes 2″ x 4″ x 48″ – 192′ lineal feet/bale 48 in a bale 4″ x 4″ x 48″ – 96′ lineal feet/bale 24 in a bale -
An Acrylic Latex Firestop Sealant TREMstop® Acrylic is a gunnable acrylic latex sealant designed for use in firestop applications, including both joints and through-penetrations.- For use on metal pipe, plastic pipe, insulated pipe, cables, cable trays, ducts, static joints and dynamic joints in fire-rated concrete, wood floor/ceiling and gypsum wall assemblies.
- TREMstop Acrylic can also be used on acoustically rated assemblies.
- Smoke Stop for Partition Joints & Penetrations
- An easy to apply, all-purpose sealant that accepts paint once fully cured.
- Excellent movement and superb unprimed adhesion to a wide range of substrates.
- When installed in accordance with a tested firestop system, it affords code compliance for both through-penetrations and fire-rated joints.
-
TREMstop Fyre-Sil is a gun-grade, neutral-cure silicone sealant designed for use in fire stopping applications, including both joints and through-penetrations.- TREMstop Fyre-Sil is for use on metal pipe, plastic pipe, cables, cable trays, ducts and multiple through penetrations
- Static joints and dynamic joints in concrete, wood floor/ceiling and gypsum wall assemblies and perimeter fire barrier joints.
- A firestop product that also provides protection against washout conditions.
- Smoke Stop for Partition Joints & Penetrations
Sizes Available in SL (Self Leveling) Rust Red 600 ml. sausg. (15/cs) 850 ml. cart. (12/cs) 19-L pail (1/cs)
-
Mirror "J" Channel/Bar TOP Mold comes in 8′ or 12′ lengths; available in Chrome, Anodized; Satin Finish, Brushed and Matte Black BOTTOM Mold comes in 12′ lengths; Chrome Finish only -
Self-Adhered Air and Vapour Barrier Membrane ExoAir® 110AT is a 22-mil composite impermeable membrane that is comprised of 16 mils of butyl and 6 mils of HDPP facer.- Primerless application allows for faster installation time.
-
Tremco Proglaze® SSG is a one-part, high-modulus, neutral cure silicone sealant ideal for a wide variety of glazing applications. Proglaze SSG provides high-performance capabilities for structural glazing as well as an exceptionally fast cure.- Designed to meet the stringent performance needs for both 2- and 4-sided structural and protective glazing, including cap, heel or toe bead.
- Fast through cure and exceptional tensile strength to meet the most stringent building codes.
- High modulus produces a tough, flexible rubber cure for a tenacious, watertight seal.
- Provides the excellent adhesion, fast through-cure and exceptional tensile strength and flexibility critical to withstanding wind cycle loads and missile impacts.
- Impact/hurricane tested to the industry's most stringent performance standards, including Miami/Dade Protocol.
- Successfully tested structural anchor in retrofit Blast Film applications.
- Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
-
Sanding Belts Coarse Grit = 60 grit and LOWER 1-1/8″ wide x 21″ long (40 per bundle) 60 grit 4″ wide x 106″ long (10 per bundle) 60 grit -
Fine Grit = 80 grit and HIGHER 1-1/8″ wide x 21″ long (40 per bundle) 80 grit 120 grit 400 grit 4″ wide x 106″ long (10 per bundle) 80 grit 120 grit 400 grit 4″ wide x 24″ long (10 per bundle) 120 grit
-
Glazelock Horseshoe Shims High quality plastic shims are cost saving solutions to your building needs. Plastic Interlocking 3″ x 4″ x 1/16″ – (1000 Shims per box) Blue 3″ x 4″ x 1/8″ – (500 Shims per box) Red 3″ x 4″ x 1/4″ – (400 Shims per box) BlackNew Tapered Wedge Shim Easy To Nail
This new cost effective shim has its own unique gripping system. It breaks off clean and can easily be nailed through.- Made of Recycled Plastic
- Resists Splitting
- Waterproof
- No Rotting
-
Extruded from SCR, and Grooved available. Cushions and supports glass, acts as a centering device for glass installed in channels. Withstands vibration, shock, and heavy wind Setting Blocks SCR Pieces 1/16″ x 1″ x 4″ 750 pcs/cs 1/8″ x 1″ x 4″ 750 pcs/cs 3/16″ x 1″ x 4″ 750 pcs/cs 1/4″ x 1″ x 4″ 750 pcs/cs Setting Blocks SCR Grooved Pieces 1/4″ x 1″ x 4″ Grvd 750 pcs/cs Setting Blocks SCR Rolls 1/4″ x 1″ x 50′ 300′ rolls/cs 3/16″ x 1″ 50′ 200′ rolls/cs 1/8″ x 1″ 50′ 400′ rolls/cs 1/16″ x 1” x 50′ 400′ rolls/cs -
We carry Polyfoam Tape which is generally used for glazing interior glass partitions. Double sided and single adhesive polyethylene tape, light weight for secondary seal in exterior glazing. Sizes Available c/w release paper Double sided 1/16” x 3/8” – 150’ Roll Double sided 1/8” x 3/8” – 75’ Roll Single sided 1/8” x 3/8” – 50’ Roll Single sided 1/4” x 3/8” – 50’ Roll -
Tremco POLYshim II Glazing Tape is High-Performance Glazing Tape. It has a continuous built in shim. Double and Single sided Poly foam Tape available.- POLYshim II Tape is used in compression glazing systems wherever the design calls for high-performance glazing of curtain wall, unitized curtain walls, punched and ribbon window systems, and sloped glazing applications.
-
Tremco Polyshim 11 Glazing Spline is designed to be used on the opposite side of the glass in windows when using Polyshim II Tape where a wedge of spline is required to compress the tape to the shim. Specially developed wedge gasket for use with Polyshim II glazing tape. P78 .160 - 500' roll P80 .120 - 500' roll P81 .200 - 500' roll -
Tremco 440 Butyl Sealant Tape Preformed for non-compression glazing or as a lap joint sealant. Excellent adhesive for retaining walls and paver’s. Some Standard Sizes Include Most common sizes are stocked
Some special sizes and profiles available; most sizes sold in Black or Grey1/8" x 3/8" Alum., Black 1/8" x 1/2" Alum. 1/8" x 3/4" Alum. 1/8" x 1" Alum. 1/8" x 2" Alum. 1/16" x 1/4" Alum., Black 1/16" x 3/8" Alum., Black 1/16" x 1" Alum., Black -
UltraSeal Straw Foam New Formulation! UltraSeal® PF-50 for Extreme Weather is a low expansion, one-component polyurethane foam.- It is UL classified and designed to be used with a straw dispenser.
- It is ideal for general sealing of gaps, holes and crevices in EXTREME temperature conditions all year round.
- UltraSeal® PF-50 is a foam system that can be used without a gun dispenser.
-
IPF GREEN is a single component polyurethane foam used to seal around windows, doors and unwanted cracks and gaps in a building envelope. It is an excellent air barrier and has natural additive to fend off rodents and insects. IPF GREEN is made from an MDI Monomer, uses environmentally friendly propellant and contains a Fire Retardant.- CCMC Approved
- Excellent cell structure
- Green in colour, for easy identification
-
Dispenses 300ml, 600ml or 800ml sausage packs. Can be converted to dispense Bulk or Cartridges with parts included. For dispensing in difficult situations consider using the Bent Plastic Cone Nozzle. Gun replacement parts are also available! -
A backer rod is used for concrete precast building. Backer rods are inserted between the concrete panels to fill the gap, thus providing a ‘backer’ for the caulking that is applied. These backer rods can be used around doors, windows, wall joints, as well as foundations. The closed cell backer rod is best in horizontal or flat joints. Backer Rod performs as a depth control for most known cold applied sealants and also helps sealant to assume the optimum hour-glass shape. A backer rod is used for the following:- Saves caulking material by controlling depth in the gaps of most joints
- Around doors, windows, wall joints and foundations
- Concrete precast building
- Provides additional insulation
- Blocks drafts
- Creates the required Hour Glass shape and depth for all joint sealants
SOFT TYPE BACKER ROD IS ALSO IN STOCK
-
Soft Type Backer Rod is a soft, non-gassing, pliable, bi-cellular backup material for construction joints and applications that require sealants. It performs as a depth control for most known cold applied sealants and also helps sealant to assume the optimum hour-glass shape. Sealants will not adhere to it; no bond breaker is required. This is why the soft rod is a popular choice. Soft Type Backer Rod is especially suited for applications with irregular and varying joint widths where standard closed cell backer rods are not appropriate and where bubbling concerns are critical. The soft rod may also be used in place of standard closed-cell backer rod in most applications. Common applications for the soft backer rod include expansion and contraction joints, window glazing, curtain wall construction partitions, parking decks, bridge and highway construction pavement maintenance, and log home chinking. A backer rod is used for the following:- Saves caulking material by controlling depth in the gaps of most joints
- Around doors, windows, wall joints and foundations
- Concrete precast building
- Provides additional insulation
- Blocks drafts
- Creates the required Hour Glass shape and depth for all joint sealants
CLOSED CELL BACKER ROD ALSO IN STOCK
-
Kwik-Seal Kitchen and Bath Acrylic Latex is mildew-resistant waterproof and paintable. It has excellent adhesion and is flexible.- Easy-to-use, multi-purpose adhesive caulk.
- Ideal for caulking and sealing in the bathroom and kitchen
- Specially formulated to provide a watertight seal around tubs, sinks, showers, and countertops
- Cured caulk is mold and mildew-resistant
- Tack-free in 15 minutes
- Resists abrasive chemicals
- Easy water clean-up
- Paintable
-
480 Premium Polyurethane Construction Adhesive, for interior and exterior produces a permanent overnight bond to almost any substrate in all climates. It is waterproof and paintable.- It is specially designed for water-resistant assemblies of substrates such as masonry, metal, composition board, gypsum board, most foam insulations including EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and polysio (Urethane), wood, hardwood flooring, concrete, stone, marble, slate, drywall and mirrors.
- Also popular on: trailers, trucks, truck bodies, rail cars, containers, buses, marine, RV, horse trailers, manufactured housing, emergency vehicles.
-
(Tremco) High quality siliconized latex acrylic that can be painted with latex paint.- Tremflex 834 can be used for general purpose interior and exterior caulking and as a back-bedding glazing compound.
- It is also highly recommended as an acoustical seal in the construction of interior walls, ceilings and floors.
- It is suitable for use on vinyl, aluminum and wood siding as well as on bathroom and kitchen fixtures.
- “Silicone Tough” latex acrylic formulation for outstanding exterior performance against the elements.
- Developed for flexibility and crack proof performance, this sealant endures expansion and contraction without cracking or losing its seal.
- Tack-free in 15 min and ready to paint in 30 to 45 min with latex or oil-based paint
- The paintable, durable sealant can fill gaps up to 1″ wide and the cured sealant is mold and mildew resistant.
