-
Available Sizes (37 ft Roll) in Grey Colour 1/4″ x 3/8″ -
Features:
- Easy to use, just slide onto the tip of your foam applicator gun
- "Injects" additional air into the foam, increasing yield & expansion without increasing pressure (safe for windows and doors)
- Reusable when cleaned with Lubri-Clean foam cleaner
- Will not damage foam gun
Typical Uses:
- Anywhere where single component foam would be normally used
- As a tool to help your apply foam in hard-to-reach spaces as small as 1/8" wide
- To protect the tip of your foam applicator gun in tight spaces
-
Wood's Powr-Grip Glass Flat Vacuum Suction Cup (8'') (Plastic Handle)- Fast attach and release
- Red-line indicator warns user of any significant vacuum loss
- Lifting Capacity: 125 lbs (57 kg)
- Cup Diameter: 8''
- Designed to make carrying of large sheets of glass easy.
- Vacuum attachment to non-porous surfaces is achieved by repeatedly depressing the pump plunger until it stays well within the handle beyond the red band.
- Once the attachment has been achieved, the glass sheet can be easily lifted.
- The rubber cup has the capability of handling almost any manual lift without damaging most delicate surfaces
- Carrying case is included.
- Flat Vacuum Cup Replacement Parts Available
- Replacement Pads
- Handle For Vacuum Cup (w Valve) (ABS)
- Valve Release Lever
- Air Filter
- Check Valve
- Check Valve Retainer
- And more
-
Glazelock Horseshoe Shims High quality plastic shims are cost saving solutions to your building needs. Plastic Interlocking 3″ x 4″ x 1/16″ – (1000 Shims per box) Blue 3″ x 4″ x 1/8″ – (500 Shims per box) Red 3″ x 4″ x 1/4″ – (400 Shims per box) BlackNew Tapered Wedge Shim Easy To Nail
This new cost effective shim has its own unique gripping system. It breaks off clean and can easily be nailed through.- Made of Recycled Plastic
- Resists Splitting
- Waterproof
- No Rotting
-
Gutter Seal+
AVAILABLE ONLY IN CANADA | Gutter Sealing Elastomeric Sealant
A single-component, high quality blend of synthetic rubber and resin for use in gutter and rainwater applications. It exhibits excellent elastomeric properties while maintaining superior adhesion under ponded water conditions. Clear only 300 mL. -
IPF AllWeather Pro is a closed single component polyurethane foam with allweather temperature performance. It is used to seal around windows, doors and unwanted cracks and gaps in environments with low temperature and/or low humidity.- Low expansion
- AllWeather performance (down to -10°C)
- IPF AllWeather Pro has achieved GREENGUARD GOLD certification
- Environmentally friendly HCFC free propellant
- Excellent cell structure
- Excellent adhesion properties
- High density compared to other gun foams
- Yellow in colour
- 18 month shelf life
-
IPF GREEN is a single component polyurethane foam used to seal around windows, doors and unwanted cracks and gaps in a building envelope. It is an excellent air barrier and has natural additive to fend off rodents and insects. IPF GREEN is made from an MDI Monomer, uses environmentally friendly propellant and contains a Fire Retardant.- CCMC Approved
- Excellent cell structure
- Green in colour, for easy identification
-
Lance Latches Left and Right are available in a package of 25 pieces. These are used with our assembled window screens. S423 Lance Latch Left 25/pk S424 Lance Latch Right 25/pk -
Lubri-Clean will clean UNCURED foam from guns, surfaces, etc.- Dissolves gun and tank foam before it cures
- It is used to clean and lubricate guns as well as clean foam from unwanted areas
- Cleans foam from unwanted areas
- An essential accessory for gun maintenance
- Can be used as an aerosol or attached to gun
- 340ml/12oz can: 12 cans/case
INSTRUCTIONS The can is designed to be installed directly onto a foam applicator gun but it also has a spray nozzle just like any other aerosol canister. Proper installation of the cleaner on a foam gun is essential. It simply screws on just like a foam can. You can also use the included plastic straw to use it anywhere else you may have undesired foam.
- While pointing applicator in garbage container, depress trigger and quickly unscrew foam can
- Remove adapter from collar and insert valve on top of cleaner can
- Thoroughly spray applicator basket
- Remove cleaner adapter and screw can onto foam applicator
- Flush thoroughly, allowing the cleaner to soak in the applicator barrel for 15 minutes
- Flush again
-
Non-combustible stone wool insulation with melting point of approx. 1177°C (2150°F) Used as the Fire Stop. Mineral Wool is used in conjunction with a fire material to prevent passage of fire and smoke. Pre-cut. This batting is designed for commercial, industrial, and residential buildings as a fire stopping insulation. It is compliant with CAN/ULC-S115. Pre Cut Sizes 2″ x 4″ x 48″ – 192′ lineal feet/bale 48 in a bale 4″ x 4″ x 48″ – 96′ lineal feet/bale 24 in a bale -
Mirror "J" Channel/Bar TOP Mold comes in 8′ or 12′ lengths; available in Chrome, Anodized; Satin Finish, Brushed and Matte Black BOTTOM Mold comes in 12′ lengths; Chrome Finish only -
Thermalbond® V2200 series is a High-Strength, Polyurethane Foam Spacer For Structural Glazing specially designed to provide the following features: • Open-cell structure allows air and moisture to reach the silicone for optimum curing of the silicone • Semi-rigid polyurethane foam is compatible with all silicone tested • Low thermal conductivity improves the performance of the wall and can support LEED points • Excellent resistance to temperature variations, fungi and oxidation APPLICATIONS • Spacer for two and four sided structural glazing systems Some Standard Sizes Include Most common sizes are stocked. Inquire for other sizes. 1/8" x 3/8" 1/8" x 1/2" 1/8" x 1" 1/4" x 1/4" 1/4" x 3/8" 1/4" x 1/2" 3/8" x 3/8" -
Self-Seal GG-266 is a single-component, neutral cure, non-slumping intumescent silicone caulk that is designed to seal combustible service penetrations in fire-rated walls and floors. As the combustible penetrating item softens and collapses under fire conditions, the firestop sealant will expand to fill the voids left when combustible materials burn and deteriorate in a fire. It swells when heated, sealing a gap, protecting material underneath in the case of a fire.- Non-sag silicone
- Water-resistant before, during, and after cure
- Freeze-thaw stable
- Protects your wall & floor openings
- Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation
- Self-Seal GG-266 has achieved GREENGUARD GOLD Certification
-
NuFlex® 302 High-Temperature Silicone is a non-sag caulking material which cures to form a sturdy, rubbery solid upon exposure to moisture in the air. It is formulated to perform at temperatures ranging from -65° to 260°C (-85° to 500°F) under continuous operating conditions. During intermittent exposure, NuFlex® 302 High Temperature will withstand temperatures as high as 316°C (600°F).- Industrial Hi-Temp Form-in-Place gasket maker
- Mechanical assemblies in high temperature environments.
- Appliance gaskets
- Ductwork sealer/adhesive
- Electrical insulation
- Air conditioner and humidifier gaskets
- High temperature spacers
- Water pump and compressor gaskets
-
Nuflex® 331 is a primerless, non-corrosive, low modulus, neutral cure sealant that exhibits high adhesive qualities when cured. NuFlex® 331 excels at bonding PVC and other plastics and is unaffected by UV and airborne chemicals. Used in butt joints and in exterior weatherproofing applications subject to movement. Can also be used in mirror backing applications.- Sealing joints between window frames and siding.
- Glazing and installation of steel, aluminum, fiberglass and wood windows
- General caulking of vents, window and door frames
- Exterior Weatherstripping
- Used as adhesive to hang mirrors
- NuFlex 302 has achieved GREENGUARD GOLD Certification
-
480 Premium Polyurethane Construction Adhesive, for interior and exterior produces a permanent overnight bond to almost any substrate in all climates. It is waterproof and paintable.- It is specially designed for water-resistant assemblies of substrates such as masonry, metal, composition board, gypsum board, most foam insulations including EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and polysio (Urethane), wood, hardwood flooring, concrete, stone, marble, slate, drywall and mirrors.
- Also popular on: trailers, trucks, truck bodies, rail cars, containers, buses, marine, RV, horse trailers, manufactured housing, emergency vehicles.
-
NuFlex 110 Butyl Rubber Roofing Sealant
NuFlex® 110 Butyl Rubber Roofing Sealant is a single component, solvent release butyl designed to provide excellent exterior weathering properties. NuFlex® 110 is formulated for use on many dissimilar building surfaces. It is our best narrow-bead sealant ideal for sealing asphalt and metal roofing systems. It adheres well to damp surfaces.- Asphalt & metal roof joints and penetrations
- Sealing skylights, windows, & doors where in contact with roofing materials
- Sealing narrow seams
-
NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F).- Bathtubs
- Shower stalls
- Bathroom vanities
- Kitchen counters and sinks
- Replacing ceramic tiles and freezers
- Water-resistant before, during, and after cure
- RTV (Room Temperature Vulcanization)
- Mildew resistant
- 50-year durability
- Can be applied in sub-zero temperatures
- NuFlex 302 has achieved GREENGUARD GOLD Certification
-
NuFlex® 302 General Purpose Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It cures to form a sturdy, rubbery solid upon exposure to moisture in the air. Due to its non-sag properties, the sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It adheres to most non-porous construction substrates. NuFlex® 302 has excellent resistance to weathering, vibration, moisture, ozone, and extreme temperatures. It may be applied in sub-zero temperatures without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F) CERTIFIED TO NSF 51 FOR FOOD CONTACT TO A MAX TEMP OF 204°C (400°F)- Form-in place gaskets where there is no oil contact
- Duct joints
- Areas that need weather stripping
- Sinks, basins, showers, and tubs
- Can be applied in sub-zero temperatures
- Water-resistant before, during, and after cure
- RTV (Room Temperature Vulcanization)
- Adheres to many substrates
- Wide temperature range performance
- 50-year durability
- Can be applied in sub-zero temperatures
- NuFlex 302 has achieved GREENGUARD GOLD Certification
-
S-600 Patio Screen Door Handle Multi Part Lock. Replacement Lock Sets Includes:- Exterior Pull
- Interior Locking Handle with Slide and Strike
- Keeper and Screws
-
-
Phifer Black & Brite Aluminum Screen offers the best outward visibility available in an aluminum insect screening product. Produced with Phifer’s electrodeposition paint system, Black & Brite Aluminum screen has a premium coating that is durable and has excellent weathering characteristics.
Standard Widths 18" 20" 22" 24″ 26" 28" 30″ 32″ 34" 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black and Brite
-
Phifer Better Vue Insect Screening is an improved Visibility screen (iVis) that offers clearer views with enhanced insect screen performance.
- New Water Shed Technology™ coating repels water, prevents dirt and debris from staying on the screen and remains cleaner longer.
- Increased insect protection and better airflow.
- More optical clarity vs. standard insect screening for a sharp, more brilliant outward view.
- Improves light transmittance in low-E glass windows with 10% better insect protection.
- Passed accelerated weathering tests (QUV 1200hrs. and Xenon Arc 2500 Kjs.)
- GREENGUARD certified.
Standard Widths 24″ 30″ 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black
-
The 18 x 14 Fiberglass Mesh Screening from Phifer are designed for applications where extra strength is desired. Built to withstand debris from harsh winds and storms, keep out most insects and other unwanted guests, but still allow for cooling breezes to flow through, these fiberglass screens make the perfect choice for any space that’s exposed to the more severe elements. Fiberglass Mesh is the traditional choice for patio and pool enclosures “See the view, not the screen.”- Phiferglass, Phifer’s trademarked fiberglass screening, has been the standard in the industry for decades.
- Woven from permanent glass yarn, which has been coated with a protective vinyl. This ensures lasting beauty, color and flexibility.
- Will not rust, corrode or stain.
- These screen fabrics are produced under the most exacting conditions. They meet rigid specifications and have all passed 1200 hours of QUV accelerated weathering.
Standard Widths 24" 30" 32" 36" 42" 48" 60" 72" 84" 96" (Other widths available upon request) Standard Roll Length 164' some sizes available in 100' rolls Standard Colours Charcoal and Gray -
Phifer Fiberglass No-See-Um fiberglass Screen is designed to control small insects.- It is woven from permanent glass yarn, which has been coated with a protective vinyl. This ensures lasting beauty, color and flexibility.
- Will not rust, corrode or stain.
- These screen fabrics are produced under the most exacting conditions. They meet rigid specifications and have all passed 1200 hours of QUV accelerated weathering.
Standard Widths 36" in stock Standard Roll Length 100' Standard Colours Charcoal -
Phifer Pet Insect Screen, pet-resistant insect screening is tear and puncture-resistant to prevent damage by dogs and cats.
- Ideal for use in high-traffic areas.
- PetScreen installs like regular insect screening.
- PetScreen is excellent for use in patio and porch enclosures as well as windows and doors.
- Pet Screen provides excellent outward visibility and is not harmful to pets.
- GREENGUARD certified
- Contains Microban® antimicrobial protection which inhibits the growth of stain and odour causing bacteria, mold and mildew on the screen.
Stocked Widths 36" 48" Standard Roll Length 100' Standard Colors Black and Grey
Composition Vinyl-coated polyester
Mesh Weight 11.2 oz/yd2 (380 g/m2)
Fabric Thickness .036 (.914mm)
Openness Factor Approximately 36%
UV Blockage Approximately 64%
-
Phifer Ultra Vue Insect Screening is an excellent Visibility screen (eVis) that offers a premium viewing experience.
- New Water Shed Technology™ coating repels water, prevents dirt and debris from staying on the screen and remains cleaner longer.
- Ideal for windows or low traffic applications where the focus is on the view.
- 25% more optical clarity for a crisper, brighter outward view.
- Improves light transmittance in low-E glass windows.
- GREENGUARD certified.
Standard Widths 24″ 30″ 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black
-
We carry Polyfoam Tape which is generally used for glazing interior glass partitions. Double sided and single adhesive polyethylene tape, light weight for secondary seal in exterior glazing. Sizes Available c/w release paper Double sided 1/16” x 3/8” – 150’ Roll Double sided 1/8” x 3/8” – 75’ Roll Single sided 1/8” x 3/8” – 50’ Roll Single sided 1/4” x 3/8” – 50’ Roll -
Used for holding screening securely in windows and doors.- Foam spline aids in securing windows and doors screen fabric
- Foam spline is durable even when exposed to the elements
-
Tremco Polyshim 11 Glazing Spline is designed to be used on the opposite side of the glass in windows when using Polyshim II Tape where a wedge of spline is required to compress the tape to the shim. Specially developed wedge gasket for use with Polyshim II glazing tape. P78 .160 - 500' roll P80 .120 - 500' roll P81 .200 - 500' roll
