-
2-Component Foam Kit A self-contained, portable two-component polyurethane foam dispensing system that utilizes a non-flammable blowing agent and requires no outside power source. The foam helps to lower heating and cooling costs by drastically reducing energy consumption. The foam kits can assist in attaining an ENERGY STAR® rating and/or LEED Certification. Features: • All-weather performance • Quick curing • Portable • Medium density polyurethane foam • Repeated use • All-in-one kits • Applies easily Basic uses include: • Residential & industrial construction • HVAC • Cold storage • Roofing • Truck trailer • Mobile home • RV • Bus • Cottage restoration • Pool & spa • Sheds • Garage • Automobile • Metal structures • Landscaping • Renovations • Marine & flotation • Asbestos abatement Call For More Information -
Tremco 440 Butyl Sealant Tape Preformed for non-compression glazing or as a lap joint sealant. Excellent adhesive for retaining walls and paver’s. Some Standard Sizes Include Most common sizes are stocked
Some special sizes and profiles available; most sizes sold in Black or Grey1/8" x 3/8" Alum., Black 1/8" x 1/2" Alum. 1/8" x 3/4" Alum. 1/8" x 1" Alum. 1/8" x 2" Alum. 1/16" x 1/4" Alum., Black 1/16" x 3/8" Alum., Black 1/16" x 1" Alum., Black -
- 300 ml cartridges
- Full sized handle for comfortable grip
- Half-cradle carriage to securely hold standard size sealant cartridges
- Built-in cartridge puncture wire
-
A Catalyst Mixer designed for mixing two component urethane sealants. Best suited for 2 gallon pail applications (1.5 gallon units).- 4" wide blade X 18" shaft length
- Fits 1/2" drill chuck.
-
Incorporates cartridge puncture wire, ladder hook, comfortable over-molded handle, and swivel carriage. POWERFUL: 400 lbs force dispensing power LONG LASTING: 12 volt Lithium-Ion battery Can dispense up to 40 cartridges on a single charge. This number will vary based on material viscosity. CONTROL: Variable Speed Trigger with max. speed dial and auto reverse for no-drip LIGHTWEIGHT: 30% lighter than our comparable 18V models FAST: Dispense a 300ml cartridge in as little as 16 seconds Incorporates cartridge puncture wire, ladder hook, comfortable over-molded handle, and swivel carriage. It comes with a 30 minute charger. 12V Lithium-Ion battery included. Some assembly required Click Here for Replacement 12V Lithium-Ion Battery Available. -
Incorporates ladder hook, comfortable over-molded handle, and swivel barrel.- 600ml sausage
- 400 lbs force dispensing power
- 12 volt Lithium-Ion battery - dispense 100+ cartridges on a single charge
- Variable Speed Trigger with max. speed dial and auto reverse for no-drip
- Lighter Drive & Battery plus aluminum barrel. 30% lighter than our comparable 18V models
- Dispense a 600ml sausage in as little as 25 seconds (5/8" nozzle opening)
-
This caulk gun has a heavy-duty 5/16" square drive rod, driven by a pair of hardened steel grip plates. Rotating 30oz (18" long) steel barrel for convenience and durability. Comfortable epoxy coated handle. Double set of oiled leather pistons stiffened by a trio of steel washers for reliable suction during loading and dispensing.- Heavy duty 5/16" square drive rod, driven by a pair of hardened steel grip plates
- Rotating 600ml (14" long) steel barrel for convenience and durability
- Comfortable epoxy coated handle
- Double set of oiled leather pistons stiffened by a trio of steel washers for reliable suction during loading and dispensing
- Conical ejector for more complete dispensing.
- Standard 1/2" ID round metal nozzle
- Threaded steel front cap
- Gun Lengths
- Empty: 23.5"
- Full: 37.5"
-
Dispenses 300ml, 600ml or 800ml sausage packs. Can be converted to dispense Bulk or Cartridges with parts included. For dispensing in difficult situations consider using the Bent Plastic Cone Nozzle. Gun replacement parts are also available! -
Webco Sealants Ltd. is the exclusive Ontario Distributor for "All Glass Parts", a supplier of Truth Hardware. We carry some of the most common "All Glass Parts" hardware for Casement Window and Patio Doors and More such as: Please contact us with your window and patio door hardware needs. -
Angle Shot Bent Cone Nozzles for Caulking Guns. Easily cuts to size with utility knife, and fits all standard size Albion bulk guns. Angle Shot Bent Nozzles fit virtually any cartridge by sliding over the existing nozzle. They hold securely between the cartridge and the end of the caulking gun. The 45º bend and extra long length make reaching into and around corners both easy and fast.- 45º Bent Spout for Use with Standard Cartridges or Bulk Guns
- Extra Long 7-1/2" (190 mm) Overall Length
-
PATIO SCREEN DOOR REPLACEMENTS FULLY ASSEMBLED - SCREEN CLOTH INCLUDED. Choice of Colour, Size, and Screen Cloth Type: Fiberglass, Aluminum, Or Pet Screen KITS UNASSEMBLED - SCREEN CLOTH NOT INCLUDED- Webco Standard Kit - Size 36 1/2" wide x 81" high
- Custom Sized Kits - regular or oversized extrusion available. Choice of Colour, and Size
-
Webco Sealants offers replacement window screens to Glass Shops and contractors.- Our standard colour choices are White, Commercial Brown & Mill. Special Colours available, Some colours have a premium charge
- Choose screen bar sizes from 1/4" Extruded; or 3/8" ; 5/16"; 7/16" Roll-formed bar.
- Choose Straight Cut Plastic Corners or Mitre Corners
- Choose Fiberglass Screen, Aluminum, or Pet Screen, Better Vue or Ultra Vue
-
Works well as a label and/or adhesive remover.- Removes unpleasant bathroom, smoking, kitchen, pet and other foul odours.
- Fresh orange scent.
- Eliminates tough odours in the air and combats odours in all kinds of fabrics.
- Neutralizes odour by penetrating and removing odour from its source.
- 12 oz/360 ml can: 12 cans/case
-
A backer rod is used for concrete precast building. Backer rods are inserted between the concrete panels to fill the gap, thus providing a ‘backer’ for the caulking that is applied. These backer rods can be used around doors, windows, wall joints, as well as foundations. The closed cell backer rod is best in horizontal or flat joints. Backer Rod performs as a depth control for most known cold applied sealants and also helps sealant to assume the optimum hour-glass shape. A backer rod is used for the following:- Saves caulking material by controlling depth in the gaps of most joints
- Around doors, windows, wall joints and foundations
- Concrete precast building
- Provides additional insulation
- Blocks drafts
- Creates the required Hour Glass shape and depth for all joint sealants
SOFT TYPE BACKER ROD IS ALSO IN STOCK
-
Green Bent Plastic Cone Nozzles for Bulk Guns. Easily cuts to size with utility knife, and fits all standard size Albion bulk guns.- Fits B-Line sausage guns such as the B12S20 with black plastic front cap
- Nozzles are bent at 45 degree angle to give you additional reach and the ability to get around corners.
- Reduces strain by eliminating the need to hold dispensing guns at uncomfortable angles
- Trim with a utility knife to desired size and shape opening
-
Bohle 'Diamantor' Wooden Handle Glass Cutter #1-200.1 Rounded wooden handle with one steel wheel. Straight edge stand-off distance: 2.5 mm. This economical glass cutter is perfect for cutting all kinds of glass. Don't worry about dropping or losing this one. -
Brace Bar and Clips (White Brace Bar Clips S505 click here)
.230 x .630” x 12’ White, Comm. Brown 1/4" high x 1/2" wide x 12' long
-
Weatherstrip for Sliding Screen Doors R-511 Vinyl Bug Strip Black available. (In Stock)- 7′ length.
- 1 1/4″ wide
- This comes standard on our Assembled Patio Screen Doors.
- 7′ length.
- 2″ wide
- This fits onto our Assembled Patio Screen Doors when Pile Strip is requested.
- 7 ft standard length.
- 1/2" pile in Black
- This fits onto our Assembled Patio Screen Doors when Pile Strip is requested.
- 7 ft standard length.
- 1/2" pile in Black or White
-
Sanding Belts Coarse Grit = 60 grit and LOWER 1-1/8″ wide x 21″ long (40 per bundle) 60 grit 4″ wide x 106″ long (10 per bundle) 60 grit -
Replacement Battery for Albion Cordless Power Sausage Gun 12V (E12S20) -
- 300 ml cartridges
- Mechanical advantage 12:1
- Switchable flow control
- Thumb activated - instant pressure release
- Built-in ladder hook
- Seal puncturing device
- Wear Compensating Device (WCD)
- Catch plate - sintered steel
- Barrel turns - application around corners
- Low-medium viscosity materials
- Rotating sintered steel barrel construction for easy application
- Durable full size handle designed for comfort and efficient dispensing of caulk
-
The Cox 51001 Sausage Gun is for the user that wants all the features of a Professional Tool but doesn't need maximum durability.- Square rod that can be rotated 4 times for longer life
- Thumb activated instant pressure release
- Puncture wire
- All steel construction
- Replaceable parts
-
DAP® ‘33’® Window Glazing is a ready-to-use glazing compound that may be used for face glazing wood or metal sash. Its knife-grade quality allows for smooth, easy application. DAP® ‘33’® Glazing sticks tight to glass and sash for an airtight, watertight seal that resists sagging, shrinking, chalking and cracking. It stays flexible throughout minor expansion and contraction and outlasts ordinary putty. Available Sizes 237 ml 1/2 pint (12/cs) White 946ml 1 Quart (6/cs) 3.78 L 1 gallon (2/cs) White -
Kwik-Seal Kitchen and Bath Acrylic Latex is mildew-resistant waterproof and paintable. It has excellent adhesion and is flexible.- Easy-to-use, multi-purpose adhesive caulk.
- Ideal for caulking and sealing in the bathroom and kitchen
- Specially formulated to provide a watertight seal around tubs, sinks, showers, and countertops
- Cured caulk is mold and mildew-resistant
- Tack-free in 15 minutes
- Resists abrasive chemicals
- Easy water clean-up
- Paintable
-
DAP Kwik-Seal Ultra Kitchen and Bath
DAP Kwik-Seal Ultra repels water, dirt and stains and offers a lifetime mold and mildew resistance guarantee. It stays looking clean, fresh and new.- Lifetime mold and mildew resistance guarantee
- 4 hour water ready
- 100% waterproof, crack proof & stain proof
- Repels water, dirt, and soap scum
- Stain proof protection
- Safe for granite & marble
- Easy water clean-up
- Low odor
- Interior use
- Not Paintable
-
Dymonic 100 is a durable, flexible polyurethane sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.- Typical applications include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors,and panels), aluminum, masonry and vinyl siding.
- Can adhere to damp or green concrete and has a skin time of 2 hrs with a tack-free time of 6 to 8 hr to significantly reduce dirt attraction.
- Movement capability of +100/-50% in typical field conditions, is low VOC, paintable, jet fuel-resistant, and will not crack, craze or yellow under extreme UV exposure.
- Suitable for water immersion and will not out gas.
- Smoke Stop for Partition Joints & Penetrations
- Unique capability to adhere to damp or green concrete and will not out gas.
- Compatible and can be coated over with Tremco's Vulkem Deck Coatings, ExoAir® Air Barrier products and the cold, fluid-applied TREMproof® line of below-grade waterproofing products.
-
Dymonic® FC is a low-modulus, single-component, moisture cure, polyurethane hybrid sealant, formulated with proprietary saline end-capped polymer technology. Dymonic FC is a high-performance hybrid that combines the best performance characteristics of polyurethane and silicone sealant.- Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
- Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, Aluminum, masonry and vinyl siding.
- Smoke Stop for Partition Joints & Penetrations
- It is fast curing with a skin time of 60 min and a tack-free time of 3 to 4 hrs to significantly reduce dirt attraction.
- Dymonic FC will not green crack due to early movement and has an exceptional movement capability of ± 35%.
- Dymonic FC is also low-VOC, paintable and will not crack or craze under UV exposure.
-
Tremco ET 675 is a 100% solid, cross-linked preformed (extruded) butyl tape. It is non-oxidizing, non-film forming, and provides exceptional flow resistance when subjected to vibration.- Concrete to concrete seals
- Glass to metal seals.
- Used to separate dissimilar metals to prevent galvanic action, and seal out moisture and air infiltration for roof and side panel lap joints.
- Exhibits superior adhesion to a wide variety of treated and untreated surfaces including metal, wood, glass, and plastic surfaces.
- Used widely in the farming industry to seal Grain Bins.
-
Fine Grit = 80 grit and HIGHER 1-1/8″ wide x 21″ long (40 per bundle) 80 grit 120 grit 400 grit 4″ wide x 106″ long (10 per bundle) 80 grit 120 grit 400 grit 4″ wide x 24″ long (10 per bundle) 120 grit
-
Fine Plastic Cone Nozzles for Bulk Guns. Easily cuts to size with utility knife, and fits all standard size Albion bulk guns.- Generally used for one application and discarded
- Fits all B-Line and similar sausage guns with ring cap
-
Available Sizes (37 ft Roll) in Grey Colour 1/4″ x 3/8″ -
Features:
- Easy to use, just slide onto the tip of your foam applicator gun
- "Injects" additional air into the foam, increasing yield & expansion without increasing pressure (safe for windows and doors)
- Reusable when cleaned with Lubri-Clean foam cleaner
- Will not damage foam gun
Typical Uses:
- Anywhere where single component foam would be normally used
- As a tool to help your apply foam in hard-to-reach spaces as small as 1/8" wide
- To protect the tip of your foam applicator gun in tight spaces
-
Wood's Powr-Grip Glass Flat Vacuum Suction Cup (8'') (Plastic Handle)- Fast attach and release
- Red-line indicator warns user of any significant vacuum loss
- Lifting Capacity: 125 lbs (57 kg)
- Cup Diameter: 8''
- Designed to make carrying of large sheets of glass easy.
- Vacuum attachment to non-porous surfaces is achieved by repeatedly depressing the pump plunger until it stays well within the handle beyond the red band.
- Once the attachment has been achieved, the glass sheet can be easily lifted.
- The rubber cup has the capability of handling almost any manual lift without damaging most delicate surfaces
- Carrying case is included.
- Flat Vacuum Cup Replacement Parts Available
- Replacement Pads
- Handle For Vacuum Cup (w Valve) (ABS)
- Valve Release Lever
- Air Filter
- Check Valve
- Check Valve Retainer
- And more
-
Glazelock Horseshoe Shims High quality plastic shims are cost saving solutions to your building needs. Plastic Interlocking 3″ x 4″ x 1/16″ – (1000 Shims per box) Blue 3″ x 4″ x 1/8″ – (500 Shims per box) Red 3″ x 4″ x 1/4″ – (400 Shims per box) BlackNew Tapered Wedge Shim Easy To Nail
This new cost effective shim has its own unique gripping system. It breaks off clean and can easily be nailed through.- Made of Recycled Plastic
- Resists Splitting
- Waterproof
- No Rotting
-
Gutter Seal+
AVAILABLE ONLY IN CANADA | Gutter Sealing Elastomeric Sealant
A single-component, high quality blend of synthetic rubber and resin for use in gutter and rainwater applications. It exhibits excellent elastomeric properties while maintaining superior adhesion under ponded water conditions. Clear only 300 mL. -
IPF AllWeather Pro is a closed single component polyurethane foam with allweather temperature performance. It is used to seal around windows, doors and unwanted cracks and gaps in environments with low temperature and/or low humidity.- Low expansion
- AllWeather performance (down to -10°C)
- IPF AllWeather Pro has achieved GREENGUARD GOLD certification
- Environmentally friendly HCFC free propellant
- Excellent cell structure
- Excellent adhesion properties
- High density compared to other gun foams
- Yellow in colour
- 18 month shelf life
-
IPF GREEN is a single component polyurethane foam used to seal around windows, doors and unwanted cracks and gaps in a building envelope. It is an excellent air barrier and has natural additive to fend off rodents and insects. IPF GREEN is made from an MDI Monomer, uses environmentally friendly propellant and contains a Fire Retardant.- CCMC Approved
- Excellent cell structure
- Green in colour, for easy identification
-
Lance Latches Left and Right are available in a package of 25 pieces. These are used with our assembled window screens. S423 Lance Latch Left 25/pk S424 Lance Latch Right 25/pk -
Lubri-Clean will clean UNCURED foam from guns, surfaces, etc.- Dissolves gun and tank foam before it cures
- It is used to clean and lubricate guns as well as clean foam from unwanted areas
- Cleans foam from unwanted areas
- An essential accessory for gun maintenance
- Can be used as an aerosol or attached to gun
- 340ml/12oz can: 12 cans/case
INSTRUCTIONS The can is designed to be installed directly onto a foam applicator gun but it also has a spray nozzle just like any other aerosol canister. Proper installation of the cleaner on a foam gun is essential. It simply screws on just like a foam can. You can also use the included plastic straw to use it anywhere else you may have undesired foam.
- While pointing applicator in garbage container, depress trigger and quickly unscrew foam can
- Remove adapter from collar and insert valve on top of cleaner can
- Thoroughly spray applicator basket
- Remove cleaner adapter and screw can onto foam applicator
- Flush thoroughly, allowing the cleaner to soak in the applicator barrel for 15 minutes
- Flush again
-
Non-combustible stone wool insulation with melting point of approx. 1177°C (2150°F) Used as the Fire Stop. Mineral Wool is used in conjunction with a fire material to prevent passage of fire and smoke. Pre-cut. This batting is designed for commercial, industrial, and residential buildings as a fire stopping insulation. It is compliant with CAN/ULC-S115. Pre Cut Sizes 2″ x 4″ x 48″ – 192′ lineal feet/bale 48 in a bale 4″ x 4″ x 48″ – 96′ lineal feet/bale 24 in a bale -
Mirror "J" Channel/Bar TOP Mold comes in 8′ or 12′ lengths; available in Chrome, Anodized; Satin Finish, Brushed and Matte Black BOTTOM Mold comes in 12′ lengths; Chrome Finish only -
Thermalbond® V2200 series is a High-Strength, Polyurethane Foam Spacer For Structural Glazing specially designed to provide the following features: • Open-cell structure allows air and moisture to reach the silicone for optimum curing of the silicone • Semi-rigid polyurethane foam is compatible with all silicone tested • Low thermal conductivity improves the performance of the wall and can support LEED points • Excellent resistance to temperature variations, fungi and oxidation APPLICATIONS • Spacer for two and four sided structural glazing systems Some Standard Sizes Include Most common sizes are stocked. Inquire for other sizes. 1/8" x 3/8" 1/8" x 1/2" 1/8" x 1" 1/4" x 1/4" 1/4" x 3/8" 1/4" x 1/2" 3/8" x 3/8" -
Self-Seal GG-266 is a single-component, neutral cure, non-slumping intumescent silicone caulk that is designed to seal combustible service penetrations in fire-rated walls and floors. As the combustible penetrating item softens and collapses under fire conditions, the firestop sealant will expand to fill the voids left when combustible materials burn and deteriorate in a fire. It swells when heated, sealing a gap, protecting material underneath in the case of a fire.- Non-sag silicone
- Water-resistant before, during, and after cure
- Freeze-thaw stable
- Protects your wall & floor openings
- Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation
- Self-Seal GG-266 has achieved GREENGUARD GOLD Certification
-
NuFlex® 302 High-Temperature Silicone is a non-sag caulking material which cures to form a sturdy, rubbery solid upon exposure to moisture in the air. It is formulated to perform at temperatures ranging from -65° to 260°C (-85° to 500°F) under continuous operating conditions. During intermittent exposure, NuFlex® 302 High Temperature will withstand temperatures as high as 316°C (600°F).- Industrial Hi-Temp Form-in-Place gasket maker
- Mechanical assemblies in high temperature environments.
- Appliance gaskets
- Ductwork sealer/adhesive
- Electrical insulation
- Air conditioner and humidifier gaskets
- High temperature spacers
- Water pump and compressor gaskets
-
Nuflex® 331 is a primerless, non-corrosive, low modulus, neutral cure sealant that exhibits high adhesive qualities when cured. NuFlex® 331 excels at bonding PVC and other plastics and is unaffected by UV and airborne chemicals. Used in butt joints and in exterior weatherproofing applications subject to movement. Can also be used in mirror backing applications.- Sealing joints between window frames and siding.
- Glazing and installation of steel, aluminum, fiberglass and wood windows
- General caulking of vents, window and door frames
- Exterior Weatherstripping
- Used as adhesive to hang mirrors
- NuFlex 302 has achieved GREENGUARD GOLD Certification
-
480 Premium Polyurethane Construction Adhesive, for interior and exterior produces a permanent overnight bond to almost any substrate in all climates. It is waterproof and paintable.- It is specially designed for water-resistant assemblies of substrates such as masonry, metal, composition board, gypsum board, most foam insulations including EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and polysio (Urethane), wood, hardwood flooring, concrete, stone, marble, slate, drywall and mirrors.
- Also popular on: trailers, trucks, truck bodies, rail cars, containers, buses, marine, RV, horse trailers, manufactured housing, emergency vehicles.
-
NuFlex 110 Butyl Rubber Roofing Sealant
NuFlex® 110 Butyl Rubber Roofing Sealant is a single component, solvent release butyl designed to provide excellent exterior weathering properties. NuFlex® 110 is formulated for use on many dissimilar building surfaces. It is our best narrow-bead sealant ideal for sealing asphalt and metal roofing systems. It adheres well to damp surfaces.- Asphalt & metal roof joints and penetrations
- Sealing skylights, windows, & doors where in contact with roofing materials
- Sealing narrow seams
-
NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F).- Bathtubs
- Shower stalls
- Bathroom vanities
- Kitchen counters and sinks
- Replacing ceramic tiles and freezers
- Water-resistant before, during, and after cure
- RTV (Room Temperature Vulcanization)
- Mildew resistant
- 50-year durability
- Can be applied in sub-zero temperatures
- NuFlex 302 has achieved GREENGUARD GOLD Certification
-
NuFlex® 302 General Purpose Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It cures to form a sturdy, rubbery solid upon exposure to moisture in the air. Due to its non-sag properties, the sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It adheres to most non-porous construction substrates. NuFlex® 302 has excellent resistance to weathering, vibration, moisture, ozone, and extreme temperatures. It may be applied in sub-zero temperatures without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F) CERTIFIED TO NSF 51 FOR FOOD CONTACT TO A MAX TEMP OF 204°C (400°F)- Form-in place gaskets where there is no oil contact
- Duct joints
- Areas that need weather stripping
- Sinks, basins, showers, and tubs
- Can be applied in sub-zero temperatures
- Water-resistant before, during, and after cure
- RTV (Room Temperature Vulcanization)
- Adheres to many substrates
- Wide temperature range performance
- 50-year durability
- Can be applied in sub-zero temperatures
- NuFlex 302 has achieved GREENGUARD GOLD Certification
-
S-600 Patio Screen Door Handle Multi Part Lock. Replacement Lock Sets Includes:- Exterior Pull
- Interior Locking Handle with Slide and Strike
- Keeper and Screws
-
-
Phifer Black & Brite Aluminum Screen offers the best outward visibility available in an aluminum insect screening product. Produced with Phifer’s electrodeposition paint system, Black & Brite Aluminum screen has a premium coating that is durable and has excellent weathering characteristics.
Standard Widths 18" 20" 22" 24″ 26" 28" 30″ 32″ 34" 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black and Brite
-
Phifer Better Vue Insect Screening is an improved Visibility screen (iVis) that offers clearer views with enhanced insect screen performance.
- New Water Shed Technology™ coating repels water, prevents dirt and debris from staying on the screen and remains cleaner longer.
- Increased insect protection and better airflow.
- More optical clarity vs. standard insect screening for a sharp, more brilliant outward view.
- Improves light transmittance in low-E glass windows with 10% better insect protection.
- Passed accelerated weathering tests (QUV 1200hrs. and Xenon Arc 2500 Kjs.)
- GREENGUARD certified.
Standard Widths 24″ 30″ 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black
-
The 18 x 14 Fiberglass Mesh Screening from Phifer are designed for applications where extra strength is desired. Built to withstand debris from harsh winds and storms, keep out most insects and other unwanted guests, but still allow for cooling breezes to flow through, these fiberglass screens make the perfect choice for any space that’s exposed to the more severe elements. Fiberglass Mesh is the traditional choice for patio and pool enclosures “See the view, not the screen.”- Phiferglass, Phifer’s trademarked fiberglass screening, has been the standard in the industry for decades.
- Woven from permanent glass yarn, which has been coated with a protective vinyl. This ensures lasting beauty, color and flexibility.
- Will not rust, corrode or stain.
- These screen fabrics are produced under the most exacting conditions. They meet rigid specifications and have all passed 1200 hours of QUV accelerated weathering.
Standard Widths 24" 30" 32" 36" 42" 48" 60" 72" 84" 96" (Other widths available upon request) Standard Roll Length 164' some sizes available in 100' rolls Standard Colours Charcoal and Gray -
Phifer Fiberglass No-See-Um fiberglass Screen is designed to control small insects.- It is woven from permanent glass yarn, which has been coated with a protective vinyl. This ensures lasting beauty, color and flexibility.
- Will not rust, corrode or stain.
- These screen fabrics are produced under the most exacting conditions. They meet rigid specifications and have all passed 1200 hours of QUV accelerated weathering.
Standard Widths 36" in stock Standard Roll Length 100' Standard Colours Charcoal -
Phifer Pet Insect Screen, pet-resistant insect screening is tear and puncture-resistant to prevent damage by dogs and cats.
- Ideal for use in high-traffic areas.
- PetScreen installs like regular insect screening.
- PetScreen is excellent for use in patio and porch enclosures as well as windows and doors.
- Pet Screen provides excellent outward visibility and is not harmful to pets.
- GREENGUARD certified
- Contains Microban® antimicrobial protection which inhibits the growth of stain and odour causing bacteria, mold and mildew on the screen.
Stocked Widths 36" 48" Standard Roll Length 100' Standard Colors Black and Grey
Composition Vinyl-coated polyester
Mesh Weight 11.2 oz/yd2 (380 g/m2)
Fabric Thickness .036 (.914mm)
Openness Factor Approximately 36%
UV Blockage Approximately 64%
-
Phifer Ultra Vue Insect Screening is an excellent Visibility screen (eVis) that offers a premium viewing experience.
- New Water Shed Technology™ coating repels water, prevents dirt and debris from staying on the screen and remains cleaner longer.
- Ideal for windows or low traffic applications where the focus is on the view.
- 25% more optical clarity for a crisper, brighter outward view.
- Improves light transmittance in low-E glass windows.
- GREENGUARD certified.
Standard Widths 24″ 30″ 36″ 42″ 48″ 60″ 72″ Standard Roll Length 100' Standard Colours Black
-
We carry Polyfoam Tape which is generally used for glazing interior glass partitions. Double sided and single adhesive polyethylene tape, light weight for secondary seal in exterior glazing. Sizes Available c/w release paper Double sided 1/16” x 3/8” – 150’ Roll Double sided 1/8” x 3/8” – 75’ Roll Single sided 1/8” x 3/8” – 50’ Roll Single sided 1/4” x 3/8” – 50’ Roll -
Used for holding screening securely in windows and doors.- Foam spline aids in securing windows and doors screen fabric
- Foam spline is durable even when exposed to the elements
-
Tremco Polyshim 11 Glazing Spline is designed to be used on the opposite side of the glass in windows when using Polyshim II Tape where a wedge of spline is required to compress the tape to the shim. Specially developed wedge gasket for use with Polyshim II glazing tape. P78 .160 - 500' roll P80 .120 - 500' roll P81 .200 - 500' roll
