Firestopping Solutions Fire Rated Archives

Dymonic 100 Polyurethane Sealant

Caulking and Sealants For Commercial Use > Firestopping Solutions Fire Rated

Dymonic 100 is a durable, flexible polyurethane sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.

Typical applications include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors,and panels), aluminum, masonry and vinyl siding.
Can adhere to damp or green concrete and has a skin time of 2 hrs with a tack-free time of 6 to 8 hr to significantly reduce dirt attraction.
Movement capability of +100/-50% in typical field conditions, is low VOC, paintable, jet fuel-resistant, and will not crack, craze or yellow under extreme UV exposure.
Suitable for water immersion and will not out gas.
Smoke Stop for Partition Joints & Penetrations
Unique capability to adhere to damp or green concrete and will not out gas.
Compatible and can be coated over with Tremco's Vulkem Deck Coatings, ExoAir® Air Barrier products and the cold, fluid-applied TREMproof® line of below-grade waterproofing products.

Available Colours Available in all standard colours COLOUR CHART DYMONIC 100 PDF Available Sizes

Product Data Sheet

Safety Data Sheet

Get a Quote

Details

Dymonic FC

Caulking and Sealants For Commercial Use > Firestopping Solutions Fire Rated

A low-modulus, single-component, moisture cure, polyurethane hybrid sealant, formulated with proprietary saline end-capped polymer technology. Dymonic FC is a high-performance hybrid that combines the best performance characteristics of polyurethane and silicone sealant.

Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, Aluminum, masonry and vinyl siding.
Smoke Stop for Partition Joints & Penetrations
It is fast curing with a skin time of 60 min and a tack-free time of 3 to 4 hrs to significantly reduce dirt attraction.
Dymonic FC will not green crack due to early movement and has an exceptional movement capability of ± 35%.
Dymonic FC is also low-VOC, paintable and will not crack or craze under UV exposure.

Available Colours Available in all standard colours COLOUR CHART DYMONIC FC PDF Available Sizes

Product Data Sheet

Safety Data Sheet

Get a Quote

Details

Tremco TREMstop FyreSil Silicone

Firestopping Solutions Fire Rated > Neutral Cure Silicone Sealant

A gun-grade, neutral-cure silicone sealant designed for use in fire stopping applications, including both joints and through-penetrations.

TREMstop Fyre-Sil is for use on metal pipe, plastic pipe, cables, cable trays, ducts and multiple through penetrations
Static joints and dynamic joints in concrete, wood floor/ceiling and gypsum wall assemblies and perimeter fire barrier joints.
A firestop product that also provides protection against washout conditions.
Smoke Stop for Partition Joints & Penetrations

Sizes Available in Rust Red and Limestone 300 ml. cart. (30/cs) 600 ml. sausg. (15/cs) 19-L pail

Sizes Available in SL (Self Leveling) Rust Red 600 ml. sausg. (15/cs) 850 ml. cart. (12/cs) 19-L pail (1/cs)

Product Data Sheet

Product Data Sheet For Self-leveling

Safety Data Sheet Gun Grade

Safety Data Sheet Self-Leveling

Get a Quote

Details

Tremco TREMstop Acrylic Latex

Firestopping Solutions Fire Rated

A gunnable acrylic latex Firestop sealant designed for use in firestop applications, including both joints and through-penetrations.

For use on metal pipe, plastic pipe, insulated pipe, cables, cable trays, ducts, static joints and dynamic joints in fire-rated concrete, wood floor/ceiling and gypsum wall assemblies.
TREMstop Acrylic can also be used on acoustically rated assemblies.
Smoke Stop for Partition Joints & Penetrations
An easy to apply, all-purpose sealant that accepts paint once fully cured.
Excellent movement and superb unprimed adhesion to a wide range of substrates.
When installed in accordance with a tested firestop system, it affords code compliance for both through-penetrations and fire-rated joints.

Paintable and Gunnable 600 ml. sausg. (15/cs) – Rust Red and White Stocked

Product Data Sheet

Safety Data Sheet

Get a Quote

Details

Mineral Wool Insulation Non-combustible

Firestopping Solutions Fire Rated

Non-combustible stone wool insulation with melting point of approx. 1177°C (2150°F) Used as the Fire Stop. Mineral Wool is used in conjunction with a fire material to prevent passage of fire and smoke. Pre-cut. This batting is designed for commercial, industrial, and residential buildings as a fire stopping insulation. It is compliant with CAN/ULC-S115. Pre Cut Sizes 2″ x 4″ x 48″ – 192′ lineal feet/bale 48 in a bale 4″ x 4″ x 48″ – 96′ lineal feet/bale 24 in a bale

Product Data Sheet

Get a Quote

Details

NUCO Firestop Intumescent Self Seal GG-266

Firestopping Solutions Fire Rated > Neutral Cure Silicone Sealant

A single-component, neutral cure, non-slumping intumescent silicone caulk that is designed to seal combustible service penetrations in fire-rated walls and floors. As the combustible penetrating item softens and collapses under fire conditions, the firestop sealant will expand to fill the voids left when combustible materials burn and deteriorate in a fire. It swells when heated, sealing a gap, protecting material underneath in the case of a fire.

Non-sag silicone
Water-resistant before, during, and after cure
Freeze-thaw stable
Protects your wall & floor openings
Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation
Self-Seal GG-266 has achieved GREENGUARD GOLD Certification

Available Sizes with Colours 300 ml. cart. (12/cs)- Rust Red 600 ml. sausg. (12/cs)-Rust Red

Product Data Sheet

Safety Data Sheet

Get a Quote

Details

Willseal Fire Rated Horizontal Expansion Seal

Firestopping Solutions Fire Rated

Pre-Compressed Fire Rated Horizontal Expansion Seal

Willseal® FR-H is a fire-rated, pre-compressed, watertight, UV stable foam, with an integral smoke barrier within the foam body, sound-attenuating expansion joint with a pre-cured, traffic-rated factory-applied sealant applied to the face. FR-H is comprised of a fire-retardant impregnated foam designed to be used in horizontal expansion joints by itself, but it can also be used behind any other expansion joint cover, plate or filler where joint depth allows.