/Products
  • Self-Seal GG-266  is a single-component, neutral cure, non-slumping intumescent silicone caulk that is designed to seal combustible service penetrations in fire-rated walls and floors.  As the combustible penetrating item softens and collapses under fire conditions, the firestop sealant will expand to fill the voids left when combustible materials burn and deteriorate in a fire. It swells when heated, sealing a gap, protecting material underneath in the case of a fire.
    • Non-sag silicone
    • Water-resistant before, during, and after cure
    • Freeze-thaw stable
    • Protects your wall & floor openings
    • Tested at positive pressure to simulate the pressure differentials that can occur in a fire situation
    • Self-Seal GG-266 has achieved GREENGUARD GOLD Certification
    Available Sizes with Colours 300 ml. cart. (12/cs)- Rust Red 600 ml. sausg. (12/cs)-Rust Red
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • Works well as a label and/or adhesive remover.
    • Removes unpleasant bathroom, smoking, kitchen, pet and other foul odours.
    • Fresh orange scent.
    • Eliminates tough odours in the air and combats odours in all kinds of fabrics.
    • Neutralizes odour by penetrating and removing odour from its source.
    • 12 oz/360 ml can: 12 cans/case
    Safety Data Sheet
    Get a Quote
  • Spline Rollers

    Single Wheel Concave - Convex

    Spline Rollers

    Get a Quote
  • (Tremco) Spectrem 1 Moisture cure Spectrem 1 is a high-performance, single-component, moisture-cure, ultralow modulus silicone sealant.
    • Ideal sealant for the most demanding dynamically moving joints.
    • This includes material having a high coefficient of linear expansion such as aluminum curtainwalls, precast concrete panels, metal panels and window perimeters
    • Ultra-low modulus means high elasticity with movement accommodation of +100/-50%.
    • With excellent adhesion to a variety of substrates, one product can be used for multiple applications on the same job from perimeter caulking to expansion joints.
    • An excellent choice for sealing difficult-to-adhere-to substrates, such as air barrier and polyethylene surfaces.
    • Resistance to driving rain, ozone, ultra-violet light and temperature extremes safeguards against water penetration with exceptional weatherability in all climate zones.
    • Greenguard Gold certification ensures safety for use in the most sensitive indoor environments including hospitals and schools.
    Available Colours Available in all standard colours COLOUR CHART SPECTREM PDF Available Sizes  
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • Incorporates cartridge puncture wire, ladder hook, comfortable over-molded handle, and swivel carriage. POWERFUL: 400 lbs force dispensing power LONG LASTING: 12 volt Lithium-Ion battery Can dispense up to 40 cartridges on a single charge. This number will vary based on material viscosity. CONTROL: Variable Speed Trigger with max. speed dial and auto reverse for no-drip LIGHTWEIGHT: 30% lighter than our comparable 18V models FAST: Dispense a 300ml cartridge in as little as 16 seconds Incorporates cartridge puncture wire, ladder hook, comfortable over-molded handle, and swivel carriage. It comes with a 30 minute charger. 12V Lithium-Ion battery included. Some assembly required Click Here for Replacement 12V Lithium-Ion Battery Available.
    Get a Quote
  • NuFlex® 302 Bath & Kitchen Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It is uniquely formulated to resist mould and mildew when fully cured. NuFlex® 302 Bath & Kitchen has excellent adhesion to ceramics, tile board, laminates such as Corian® and Arborite® and most acrylics. NuFlex® 302 Bath & Kitchen has excellent resistance to weathering, vibration, moisture, ozone and extreme temperatures. It may be applied in sub-zero weather without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F).
    • Bathtubs
    • Shower stalls
    • Bathroom vanities
    • Kitchen counters and sinks
    • Replacing ceramic tiles and freezers
    • Water-resistant before, during, and after cure
    • RTV (Room Temperature Vulcanization)
    • Mildew resistant
    • 50-year durability
    • Can be applied in sub-zero temperatures
    • NuFlex 302 has achieved GREENGUARD GOLD Certification
    Available Sizes and Colours 300 ml. cart. (12/cs)- Clear 300 ml. cart. (12/cs)- White Other colours may be available on request such as Bone and Almond 
    Product Data Sheet 302 Bath & Kitchen
    Safety Data Sheet 302 Bath & Kitchen Clear
    Get a Quote
  • NuFlex® 302 General Purpose Silicone Sealant is a medium modulus one-component acetoxy cure, non-sag caulking material. It cures to form a sturdy, rubbery solid upon exposure to moisture in the air. Due to its non-sag properties, the sealant can be applied overhead or on sidewall joints and surfaces without sagging, slumping, or running off. It adheres to most non-porous construction substrates. NuFlex® 302 has excellent resistance to weathering, vibration, moisture, ozone, and extreme temperatures. It may be applied in sub-zero temperatures without loss of extrusion or physical property characteristics and is effective to -46°C (-50°F) CERTIFIED TO NSF 51 FOR FOOD CONTACT TO A MAX TEMP OF 204°C (400°F)
    • Form-in place gaskets where there is no oil contact
    • Duct joints
    • Areas that need weather stripping
    • Sinks, basins, showers, and tubs
    • Can be applied in sub-zero temperatures
    • Water-resistant before, during, and after cure
    • RTV (Room Temperature Vulcanization)
    • Adheres to many substrates
    • Wide temperature range performance
    • 50-year durability
    • Can be applied in sub-zero temperatures
    • NuFlex 302 has achieved GREENGUARD GOLD Certification
    Available Sizes and Colours 300 ml. cart. (12/cs)- Clear 300 ml. cart. (12/cs)- White
    Product Data Sheet 302 General Purpose
    Safety Data Sheet 302 General Purpose
    Get a Quote
  • DAP Kwik-Seal Ultra Kitchen and Bath

    DAP Kwik-Seal Ultra repels water, dirt and stains and offers a lifetime mold and mildew resistance guarantee. It stays looking clean, fresh and new.
    • Lifetime mold and mildew resistance guarantee
    • 4 hour water ready
    • 100% waterproof, crack proof & stain proof
    • Repels water, dirt, and soap scum
    • Stain proof protection
    • Safe for granite & marble
    • Easy water clean-up
    • Low odor
    • Interior use
    • Not Paintable
    Available Sizes 162 ml (15/cs) White squeeze tube
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • Screen Mesh Comparison swatchs Phifer Pet Insect Screen
    Phifer Fiberglass No-See-Um fiberglass Screen is designed to control small insects.
    • It is woven from permanent glass yarn, which has been coated with a protective vinyl. This ensures lasting beauty, color and flexibility.
    • Will not rust, corrode or stain.
    • These screen fabrics are produced under the most exacting conditions. They meet rigid specifications and have all passed 1200 hours of QUV accelerated weathering.
    Standard Widths 36" in stock
    Standard Roll Length 100'
    Standard Colours Charcoal
    Phifer Insect Screen Data
    Get a Quote
  • Brace Bar and Clips (White Brace Bar Clips S505 click here)  

    .230 x .630” x 12’ White, Comm. Brown 1/4" high x 1/2" wide x 12' long  
    Get a Quote
  • White Vinyl U Track

    For 3/8” screen bar (7/16 “ x 7/16” x 12')  
    Get a Quote
  • Jamb Track S180 R-178 Aluminum Sill Track
    Track for Sliding Patio Door Screens are in stock.
    • R-178 Sill Track Extruded Aluminum -12 ft stock length. Bottom Track - Use for Top and Bottom. One length is enough for both. - 11/16" W x 3/8" H x 12' L
    • S-179 Header Track, White Vinyl - 12 ft. stock length. TopTrack - 7/8" W x 1/2" H x 12' L
    • S-180 Jamb Channel, White Vinyl - 8 ft. stock length. Side Track - 7/8" W x 1/2" H x 8' L
     
    Get a Quote
  • weatherstripping with Fin 12-1261F Weatherseal Varieties for doors
    #12-1261  1/4" Grey Bug Pile  Weatherstripping  (In Stock) Weatherseal For Doors (1/4" Backing) Slide in (15/64'' Pile)
    • No Plastic Fin
    • Designed to slide into an aluminum channel or carrier
    • Sold by the foot
      #12-1261F  1/4" Grey Bug Pile With Fin Weatherstripping  (Special Order) (1/4" Backing) Slide in (17/64'' Pile)
    • With Plastic Fin
    • Designed to slide into an aluminum channel or carrier
    • Sold by the foot
      #12-1275  7/16" Grey Bug Pile Pile Weatherstripping  (In Stock)
    • (7/16" Backing) Slide in (17/64'' Pile)
    • Designed for commercial doors
    • Sold by the foot
          #12-1294-A  Polyflex Weather seal (White) (29/64'' Width) (In Stock) For Wood Casement Windows
    • Width: 0.453 (29/64'') Height A: 0.230'' (15/64'') Height B:0.220'' (7/32'')
    • Designed for Wood Casement Windows
    • 12 ft standard length.
        #12-1295-A  Polyflex Weather seal (White) (23/64'' Width) (In Stock) For Sliding Glass Doors Out-performs metal, rigid vinyl and flexible vinyl weatherstripping in compressions and wipe applications for wood casements, wood entry and sliding glass doors.
    • Width: 0.359 (23/64'') Height A: 0.230'' (15/64'') Height B:0.234'' (15/64'')
    • Designed for sliding glass doors
    • 12 ft. standard length.
     

    MORE VARIETIES AVAILABLE

    WEATHERSTRIP, GLAZING RUBBER & SWEEPS Whatever Weather Strip you can find on the All Glass Parts Website we can order in for your glass shop.

    All Glass Parts Window and Door Hardware Logo

    Get a Quote
  • Features:

    • Easy to use, just slide onto the tip of your foam applicator gun
    • "Injects" additional air into the foam, increasing yield & expansion without increasing pressure (safe for windows and doors)
    • Reusable when cleaned with Lubri-Clean foam cleaner
    • Will not damage foam gun

    Typical Uses:

    • Anywhere where single component foam would be normally used
    • As a tool to help your apply foam in hard-to-reach spaces as small as 1/8" wide
    • To protect the tip of your foam applicator gun in tight spaces
    Nozzles are sold individually.
    Get a Quote
  • Toxic Solvents For Degreasing And Cleaning
    Solvents IPA, MEK, Xylol and Mineral spirits used for removing dissolving, thinning, degreasing and cleaning paint and sealants are available.
    • IPA Uses :-    Isopropyl Alcohol 90% - 100% is a Thinner / Reducer Liquid Extremely flammable liquid and vapour. Flammable. vapour may cause flash fire. harmful if inhaled or swallowed. Causes severe eye and skin irritation. Causes respiratory tract irritation. May be harmful if absorbed through skin. Contains material that may cause target organ damage, based on animal data.
    • MEK Uses :-  Methyl Ethyl Ketone is a degreaser Liquid  used to remove adhesives  and other coatings from surfaces. MEK can be used to remove residual glue, dirt, grease, paint, or older coating layers that are starting to erode.  MEK is soluble in water and alcohol. Extremely flammable liquid and vapour. Flammable. vapour may cause flash fire. harmful if inhaled or swallowed. Causes severe eye and skin irritation. Causes respiratory tract irritation. May be harmful if absorbed through skin. Contains material that may cause target organ damage, based on animal data.
    • Mineral Spirits Uses :- Petroleum spirits is a degreaser for cleaning equipment and thinning paints. It will dissolve gum and other sticky resins. Safe to use on wooden furniture with a lacquer or varnish finish
    • Xylol Uses :- Xylol (Xylene) is an excellent solvent for cleaning tools and equipment immediately after use. Flammable liquid and vapor. Harmful in contact with skin or if inhaled. Causes serious eye irritation. Causes skin irritation. Suspected of causing cancer if inhaled. May be fatal if swallowed and enters airways. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure if inhaled. (ears)
    Available Sizes: IPA - 3.78L Xylol - 3.78L MEK - 3.78L Mineral Spirits - 3.78L
    Safety Data Sheet Isopropyl Alcohol
    Safety Data Sheet MEK
    Safety Data Sheet Xylol
    Safety Data Sheet Mineral Spirits
    Get a Quote
  • Nuflex® 331  is a primerless, non-corrosive, low modulus, neutral cure sealant that exhibits high adhesive qualities when cured. NuFlex® 331 excels at bonding PVC and other plastics and is unaffected by UV and airborne chemicals. Used in butt joints and in exterior weatherproofing applications subject to movement. Can also be used in mirror backing applications.
    • Sealing joints between window frames and siding.
    • Glazing and installation of steel, aluminum, fiberglass and wood windows
    • General caulking of vents, window and door frames
    • Exterior Weatherstripping
    • Used as adhesive to hang mirrors
    • NuFlex 302 has achieved GREENGUARD GOLD Certification
    Available Sizes and Colours 300 ml. cart. (12/cs)- Clear
    Product Data Sheet 331 Exterior
    Safety Data Sheet 331 Exterior
    Get a Quote
  • Trempro JS-773 Trempro JS-773+ is a high solids,  non-skinning, non-drying synthetic butyl elastomer sealant. It was designed for field caulking of panel joints and can be used for in-plant applications.
    • Also ideal for buttering or bedding non-porous components that are squeezed together by fastening or for field caulking of the interior panel joints of PEMB panels.
    • Can be used to separate dissimilar metals to pre vent galvanic action.
    • Excellent adhesion to a variety of metals and metal finishes, polyvinylidene fluoride (PVDF), aluminum, and fiberglass.
    Available Colours Available in Off White Available Sizes
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • IPF AllWeather Pro is a closed single component polyurethane foam with allweather temperature performance. It is used to seal around windows, doors and unwanted cracks and gaps in environments with low temperature and/or low humidity.
    • Low expansion
    • AllWeather performance (down to -10°C)
    • IPF AllWeather Pro has achieved GREENGUARD GOLD certification
    • Environmentally friendly HCFC free propellant
    • Excellent cell structure
    • Excellent adhesion properties
    • High density compared to other gun foams
    • Yellow in colour
    • 18 month shelf life
    Available Sizes 12 cans per case 26 oz/750 ml can
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • Willseal FR-H

    Pre-Compressed Fire Rated Horizontal Expansion Seal

    Willseal® FR-H is a fire-rated, pre-compressed, watertight, UV stable foam, with an integral smoke barrier within the foam body, sound-attenuating expansion joint with a pre-cured, traffic-rated factory-applied sealant applied to the face. FR-H is comprised of a fire-retardant impregnated foam designed to be used in horizontal expansion joints by itself, but it can also be used behind any other expansion joint cover, plate or filler where joint depth allows.

    Basic Uses

    • Primary horizontal expansion joints with vehicular & pedestrian traffic
    • Parking garages
    • Stadiums
    • Plaza decks on grade
    • Airport runways
    • Ceiling applications
    Product Data Sheet
    Application Instructions
    Willseal® FR-H Application Youtube Video
    Get a Quote
  • 2-Component Foam Kit A self-contained, portable two-component polyurethane foam dispensing system that utilizes a non-flammable blowing agent and requires no outside power source. The foam helps to lower heating and cooling costs by drastically reducing energy consumption. The foam kits can assist in attaining an ENERGY STAR® rating and/or LEED Certification. Features: • All-weather performance • Quick curing • Portable • Medium density polyurethane foam • Repeated use • All-in-one kits • Applies easily Basic uses include: • Residential & industrial construction • HVAC • Cold storage • Roofing • Truck trailer • Mobile home • RV • Bus • Cottage restoration • Pool & spa • Sheds • Garage • Automobile • Metal structures • Landscaping • Renovations • Marine & flotation • Asbestos abatement Call For More Information
    Get a Quote
  • PURFECTSEAL is a single-component, moisture-curing, low-expansion gun foam, which has good cold weather gun ability. It is specially formulated to be ‘O‐Zone’ friendly and is extremely economical — ideal for weather applications down to ‐10°C.
    • General sealing around windows and doors
    • General construction applications
    • Gap filling in new & retrofit construction
    • Ideal for weather applications down to ‐10°C.
    • Compatible with standard professional foam dispensers
    Available Sizes 12 cans per case 29 oz/800 ml can
    PRODUCT DATA SHEET
    Safety Data Sheet
    Get a Quote
  • Gutter Seal+

    AVAILABLE ONLY IN CANADA | Gutter Sealing Elastomeric Sealant

    A single-component, high quality blend of synthetic rubber and resin for use in gutter and rainwater applications. It exhibits excellent elastomeric properties while maintaining superior adhesion under ponded water conditions. Clear only 300 mL.
    Product Data Sheet
    Safety Data Sheet
    Get a Quote
  • NuFlex 110 Butyl Rubber Roofing Sealant

    NuFlex® 110 Butyl Rubber Roofing Sealant is a single component, solvent release butyl designed to provide excellent exterior weathering properties. NuFlex® 110 is formulated for use on many dissimilar building surfaces. It is our best narrow-bead sealant ideal for sealing asphalt and metal roofing systems. It adheres well to damp surfaces.
    • Asphalt & metal roof joints and penetrations
    • Sealing skylights, windows, & doors where in contact with roofing materials
    • Sealing narrow seams
    Available Colours Available in Black, White, Grey Available Sizes
    Product Data Sheet
    Safety Data Sheet
    Get a Quote