Paintable Caulking

//Paintable Caulking
  • Dymonic 100 is a durable, flexible polyurethane sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
    • Typical applications include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors,and panels), aluminum, masonry and vinyl siding.
    • Can adhere to damp or green concrete and has a skin time of 2 hrs with a tack-free time of 6 to 8 hr to significantly reduce dirt attraction.
    • Movement capability of +100/-50% in typical field conditions, is low VOC, paintable, jet fuel-resistant, and will not crack, craze or yellow under extreme UV exposure.
    • Suitable for water immersion and will not out gas.
    • Smoke Stop for Partition Joints & Penetrations
    • Unique capability to adhere to damp or green concrete and will not out gas.
    • Compatible and can be coated over with Tremco's Vulkem Deck Coatings, ExoAir® Air Barrier products and the cold, fluid-applied TREMproof® line of below-grade waterproofing products.
    Available Colours Available in all standard colours COLOUR CHART DYMONIC 100 PDF Available Sizes  
    Product Data Sheet
    Get a Quote
  • Dymonic® FC is a low-modulus, single-component, moisture cure, polyurethane hybrid sealant, formulated with proprietary saline end-capped polymer technology. Dymonic FC is a high-performance hybrid that combines the best performance characteristics of polyurethane and silicone sealant.
    • Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
    • Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, Aluminum, masonry and vinyl siding.
    • Smoke Stop for Partition Joints & Penetrations
    • It is fast curing with a skin time of 60 min and a tack-free time of 3 to 4 hr. to significantly reduce dirt attraction.
    • Dymonic FC will not green crack due to early movement and has an exceptional movement capability of ± 35%.
    • Dymonic FC is also low-VOC, paintable and will not crack or craze under UV exposure.
    Available Colours Available in all standard colours COLOUR CHART DYMONIC FC PDF Available Sizes  
    Product Data Sheet
    Get a Quote
  • Sikaflex 1a is a premium-grade, high performance, moisture-cured,one-component, polyurethane-based, non-sag elastomeric sealant. Used for all types of joints with maximum depth of 13 mm and a maximum expansion of 25%.
    • Excellent for small joints and fillets: windows, door frames, reglets, flashing, and many construction adhesive applications,
    • Suitable for vertical and horizontal joints.
    Available Colours Available in all standard colours SIKAFLEX 1A COLOUR CHART PDF Available Sizes  
    Product Data Sheet
    Get a Quote
  • Vulkem® 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints.
    • Approved for exterior use only.
    • Excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints.
    • Durable, flexible, and offers excellent performance in dynamic joints.
    Available Colours Available in all standard colours Available Sizes  
    Product Data Sheet
    Get a Quote
  • Vulkem® 45 SSL is a one-part, moisture-curing, low-modulus polyurethane sealant especially developed for sealing joints in level and/or slightly sloped surfaces. It provides exceptional wear and tear resistance required in high traffic areas.
    • Formulated for use in expansion joints in sidewalks, swimming pool decks, plazas, floors and any other horizontal surfaces with slopes up to 6% (e.g. 1' rise for every 16' run).
    • Traffic rated, pourable, semi-self-leveling sealant with exceptional primerless adhesion and movement capability.
    • Suitable for continuous immersion in non-chlorinated water.
    • Smoke Stop for Partition Joints & Penetrations
    • Jet Fuel Resistant
    • Has a unique capability to adhere to damp or green concrete.
    Available Colours Available in all standard colours Available Sizes  
    Product Data Sheet
    Get a Quote
  • (Tremco) High quality siliconized latex that can be painted with latex paint.
    • Tremflex 834 can be used for general purpose interior and exterior caulking and as a back-bedding glazing compound.
    • It is also highly recommended as an acoustical seal in the construction of interior walls, ceilings and floors.
    • It is suitable for use on vinyl, aluminum and wood siding as well as on bathroom and kitchen fixtures.
    • “Silicone Tough” latex formulation for outstanding exterior performance against the elements.
    • Developed for flexibility and crack proof performance, this sealant endures expansion and contraction without cracking or losing its seal.
    • Tack-free in 15 min and ready to paint in 30 to 45 min with latex or oil-based paint
    • The paintable, durable sealant can fill gaps up to 1″ wide and the cured sealant is mold and mildew resistant.
    Available Colours The 9L pail is available in White only Available Sizes  
    Product Data Sheet
    Get a Quote
  • (Mulco) Siliconized latex-based sealant mildew-resistant, for interior and exterior use with good adhesion to plastic and can be painted.
    • Used to seal the joints between two perpendicular surfaces submitted to medium movements between the frames of doors and windows and inside walls or outdoor sidings, in renovation applications.
    • Can be used on painted or stained wood, ceramic, plastic materials, polystyrene insulation and fibreglass.
    • Can be applied around showers or bathtubs.
    • Can be applied on vertical, horizontal or overhanging surfaces without subsiding or sagging.
    • Does not require painting; however it can be painted over 24 hours after application.
    Available Colours Available in Clear and White Available Sizes  
    Product Data Sheet
    Get a Quote
  • 480 Premium Polyurethane Construction Adhesive, for interior and exterior produces a permanent overnight bond to almost any substrate in all climates. It is waterproof and paintable.
    • It is specially designed for water-resistant assemblies of substrates such as masonry, metal, composition board, gypsum board, most foam insulations including EPS (expanded polystyrene foam), XPS (extruded polystyrene foam) and polysio (Urethane), wood, hardwood flooring, concrete, stone, marble, slate, drywall and mirrors.
    • Also popular on: trailers, trucks, truck bodies, rail cars, containers, buses, marine, RV, horse trailers, manufactured housing, emergency vehicles.
    Available Sizes
    Product Data Sheet
    Get a Quote
  • Kwik-Seal tub and tile adhesive caulk is mildew resistant and paintable. It has excellent adhesion and is flexible.
    • Easy-to-use, multi-purpose adhesive caulk.
    • Ideal for caulking and sealing in the bathroom and kitchen
    • Specially formulated to provide a watertight seal around tubs, sinks, showers, and countertops
    • Cured caulk is mold and mildew-resistant
    • Tack-free in 15 minutes
    • Resists abrasive chemicals
    • Easy water clean-up
    Available Sizes 162 ml (12/cs) White Plus squeeze tube 162 ml (12/cs) White squeeze tube 162 ml (12/cs) Clear & Almond squeeze tube
    Product Data Sheet
    Get a Quote
  • XCEL UCB Ultra Clear Bond is a completely weather resistant, odourless, transparent MS Polymer adhesive 100% solvent free, and environmentally friendly.
    • Permanently flexible
    • Resists Vibrations
    • Adheres to wet and dry surfaces
    • Suitable for indoors and outdoors
    • Paintable
    • Odourless
    • High UV and Fungus resistance
    • Fast curing
    • Cures shrink free
    • High adhesive strength
    • ISEGA & HACCP Food Grade Certified
    300 ml. ctg. 12 per case Clear
    Product Data Sheet
    Get a Quote
  • XCEL IGA is an instant grab MS Polymer adhesive. It was developed for high strength initial bond. It fixes large panels and heavy objects without support or mechanical fixings, and has high tensile strength. It cures without shrinking, resists vibrations and remains flexible. It is available in 2 colours, grey and white.
    • Permanently flexible
    • Resists Vibrations
    • Adheres to wet and dry surfaces
    • Suitable for indoors and outdoors
    • Paintable
    • Odourless
    • High UV and Fungus resistance
    • Fast curing
    • Cures shrink free
    • High adhesive strength
    • ISEGA & HACCP Food Grade Certified
    300 ml. ctg. 12 per case White
    Product Data Sheet
    Get a Quote